Filter
Top Products
Headset Operation
Aspire Software Manual Features ◆ 349
Conditions
(A.) While using the headset, the Headset function key becomes a release (disconnect) key and no
dial tone is heard from the speaker.
(B.) While in the headset mode, the hook switch is not functional.
(C.) The Headset Programmable Function key (05) and Headset service code (188) are not
available for i-Series phones.
Default Setting
Disabled.
Programming
➻
11-11-43 : Service Code Setup (for Setup/Entry Operation) - Headset Mode Switching
Assign the service code for headset mode switching (Default: 188).
➻ 15-07-01 : Programmable Function Keys
Assign a function key for Headset operation (code 05).
➻ 20-02-05 : System Options for Multi-Line Telephones - Headset Busy Mode
Set the conditions under which a headset extension is busy to incoming callers:
● The Headset extension is busy to incoming callers when only one extension appearance is
busy (0).
OR
● Headset extension is busy to incoming callers only when both extension appearances are busy
(1).
➻ 20-02-12 : System Options for Multi-Line Telephones - Forced Intercom Ringing
Determine whether intercom calls should ring or voice-announce extensions (0=voice,
1=ring).
➻ 20-02-14 : System Options for Multi-Line Telephones - Headset Ringing Cancel Timer
When a keyset is ringing in the headset mode and this timer expires, the ringing will switch to
regular ringing from the keyset ringer (Entries: 0-64800 seconds, Default: 30).
➻ 20-03-06 : System Options for Single Line Telephone - Headset Start Time (for SLT)
Define the headset ringing start time. After this timer expires from the time when a SLT is off
hook, the system will set the SLT to headset ringing mode (Default: 5 seconds, Entries: 0-
64800).
➻ 20-13-38 : Class of Service Options (Supplementary Service) - Headset Ringing
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to use the
Headset (Default: 0 [disabled]).
➻ 41-14-04 : ACD Options - Automatic Answer in Headset Mode
With ACD, enable (1) or disable (0) a user’s ability to automatically answer calls as they ring
in while in headset mode.
➻ 80-01-57 : Service Tone Setup - Headset Ear Piece Ringing Tone
Customize the system’s basic tone for the headset ringing if required.