Filter
Top Products
VoIP
Aspire Software Manual Features ◆ 651
Programming - VoIP
These programs are always required with the VoIP feature. Refer to the following feature options
for additional programming.
➻ 10-12-01 : NTCPU Network Setup - IP Address
Select the IP address for the IP connection (default: 172.16.0.10). A static IP address is
required by the NTCPU. The system must be reset in order for the change to take effect.
➻ 10-12-02 : NTCPU Network Setup - Subnet Mask
Select the Subnet Mask to be used by the IP server (default: 255.255.0.0).
➻ 10-12-03 : NTCPU Network Setup - Default Gateway
If required, select the default gateway IP address to be used when using a router
(default: 0.0.0.0).
Programming - Static IP Address
In addition to the system programming for the NTCPU or VOIPU PCB, the IP phone also has
options which must be programmed from the phone itself. Be sure to set both the system and phone
options.
➻ 10-13-01 : In-DHCP Server Setup - DHCP Server Mode
Disable (0) the system’s ability to use the built-in DHCP server.
➻ 84-04-01 : VOIPU PCB DHCP Server Mode Setup
Disable (0) the use of DHCP for the VOIPU PCB.
➻ 84-05-01 : VOIPU IP Address Setup - IP Address
For each VOIPU PCB, enter the IP address for the VOIPU PCB (default: slot 1=172.16.0.20,
slot 2 = 172.16.0.21, etc.). The IP address should be increased according to the number of
VOIPU PCBs. This entry becomes invalid if Program 84-04 is set to "1" (DHCP enabled).
➻ 84-06-01 : VOIPU Setup - RTP Port Number
For each VOIPU PCB, enter the RTP port number (default 10020).
Programming - Aspire IP Keyset or Aspire Keyset with IP Adapter, Static IP Address
Setting the IP Address on an Aspire IPhone or Aspire Keyset with IP Adapter Using a
Static IP Address
1. On the Aspire IP keyset, enter the phone’s program mode by pressing HOLD CONF * #.
This enters the IP User Menu program mode to select the settings for the individual
phone.
To enter the phone’s program mode, the display must show the time, error, or “Con-
necting” message prior to pressing HOLD CONF * #.