Filter
Top Products
Direct Inward System Access (DISA)
Aspire Software Manual Features ◆ 299
➻ 21-15-01 : Alternate Trunk Route for Extensions
Designate the trunk route accessed when a user dials the Alternate Trunk Route Access Code.
Refer to “Trunk Group Routing” to set up outbound routing.
➻ 22-01-11 : System Options for Incoming Calls - VRS Waiting Message Interval Time
Setup the sending duration time of the Auto - Attendant & Queuing. The message is repeat-
edly sent out within the specified time (0-64800 seconds).
➻ 22-02-01 : Incoming Call Trunk Setup
For DISA operation, set the trunk service type to 2. You can have a different service type for
each Night Service mode.
➻ 22-04-01 : Incoming Extension Ring Group Assignment
Assign the extensions that should receive the overflow. Set the ringing in Program 22-06
(0=trunks don’t ring [just flash line keys], 1=trunks ring).
➻ 25-01-01 : VRS/DISA Line Basic Data Setup - VRS/DISA Dial-In Mode
Select whether the DISA trunk will use the Extension number/Service code specify (0) or the
Dial Conversion Table (1).
➻ 25-01-02 : VRS/DISA Line Basic Data Setup - DISA User ID
Select whether or not the DISA User ID is to be used (0=disable, 1=enable).
➻ 25-01-03 : VRS/DISA Line Basic Data Setup - VRS/DISA Transfer Alarm
Select whether the DISA transfer alarm should be used (0=normal, 1=alarm).
➻ 25-02-01 : VRS/DISA VRS Message
Assign the source and VRS message number to be used as the Automated Attendant Message
for each trunk which is assigned as a VRS/DISA (0=No Message, 1=VRS [VRS Message
Number 01-48], 2=ACI [ACI Group Number=1-4 or 01-16], 3= SLT [Department Group
Number=1-8 or 01-64]).
➪ Aspire S Trunks: 1-8
➪ Aspire Trunks: 001-200
➻ 25-03-01 : VRS/DISA Transfer Ring Group With Incorrect Dialing
Set the operating mode of each DISA trunk. This sets what happens to the call when the DISA
caller dials incorrectly. The call can either disconnect (0), transfer to an alternate ring group
destination, or transfer to In-Skin/External Voice Mail, or Centralized Voice Mail.
➪ Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➪ Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➻ 25-04-01 : VRS/DISA Transfer Ring Group With No Answer/Busy
Set the operating mode of each DISA trunk. This sets what happens to the call when the DISA
caller calls a busy or unanswered extension. The call can either disconnect (0), transfer to an
alternate ring group destination, In-Skin/External Voice Mail, or Centralized Voice Mail.
➪ Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➪ Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➻ 25-05-01 : VRS/DISA Error Message Assignment
Assign the VRS message number to be used as the Automated Attendant error message. For
each VRS/DISA trunk that the VRS will answer, enter the VRS message (1-48) the outside
caller hears if they dial incorrectly. If you enter 0 (i.e., no error message), the call reroutes
according to Program 25-03 and 25-04. For each trunk, you make a separate entry for each
Night Service mode.