Filter
Top Products
Center Telephone Book
Aspire Software Manual Features ◆ 195
Operation
New Registration
Registration allows the user to enter new data into the telephone book.
1. From an idle keyset, press the PROG Soft Key. then press the DOWN ARROW Soft Key twice.
TELBK is displayed on Soft Key 1.
2. Press the TELBK Soft Key. The display indicates the following:
3. Press Soft Key 1 for Registration.
Pressing the CONF key from this screen on will back up the view to the previous screen.
4. If 2 Telephone Books are defined in Program 15-19-01 and 15-19-02:
Press Soft Key 1 or 2 to select the Telephone Book to register new data.
By default, the user will search by name (indicated by the [A] in the upper right-hand
corner of the display. Soft Key 1 will step through the different search options (numbers,
Kana, alpha). To search by number, press the NUM soft key - the [A] changes to [1].
5. Input the name (up to 12 digits) and press the HOLD button.
6. Using the dial pad, select the Group number.
7. Enter the number to be stored and press HOLD.
8. Enter the bin number where the telephone number is to be stored and press HOLD.
The next available bin number is automatically displayed.
9. The display indicates the bin number as registered with the following display. This display
will remain for approximately 3 seconds or you can press the CONF button to continue.
1:REGIST 2:SEARCH
3:SETTING 4:DeleteAll
1: 2: 3: 4:
[REGIST DATA]
TLBK1 TLBK2
TLBK1:INPUT NAME [A]
<
NUM
← →
TLBK1:INPUT NAME [A]
ABC <
NUM
← →
TLBK1:SELECT GROUP
1:GROUP1 2:GROUP2
3:GROUP3 4:GROUP4
TLBK1:INPUT NUMBER
ABC
2035551234
TLBK1:REGIST MEMORY
>000
[0- 299]
MEMORY:000 REGISTERED
REGISTED DATA 1/300