Filter
Top Products
Program 20 : System Option Setup
20-03 : System Options for Single Line Telephones
960 ◆ Programming Aspire Software Manual
20-03 : System Options for Single Line Telephones
Description
Use Program 20-03 : System Options for Single Line Telephones to set up various options for
Single Line Telephones.
Input Data
Level:
Aspire S Aspire M/L/XL
IN
• Available. • Available.
• Item 06 available.
• Item 07 rquires software 4.0E+.
• Item 06 available with software 1.20+.
• Item 07 rquires software 4.0E+.
Item
No.
Item Input Data Default
Related
Program
01 SLT Call Waiting Answer Mode
For a busy single line (500/2500 type) telephone, set the
mode used to answer a camped-on trunk call.
For ESL sets, enabling this option (1) allows the user to
dial Service Code 154 for Voice Mail Conversation
Record.
0 = Hook Flash
1 = Hook Flash + Service
code (894)
0 11-12-47
02 Ignore Received DP Dial on DTMF SLT Port
Use this option to define whether the system should
receive dial pulse and DTMF signals (0) or ignore dial
pulse and only accept DTMF signals (1).
0 = Do Not Ignore
1 = Ignore
0 15-03-01
03 SLT DTMF Dial to Trunk Lines
• Type 0 : The system keeps the digits dialed by the
SLT on a trunk in a buffer. After all the digits have
been received, the system sends all the digits to the
trunk. If the time space between digits is longer than
the timer in Item 4, the system considers all digits
received.
• Type 1 : The system passes the received digits from
the SLT to the trunk immediately. If the SLT has a
Last Number Dial key without a pause, this key may
not be able to use the Last Number Dial key with the
Type 1 setting.
When using a 3rd-party external paging device, set this
option to “1”. In addition, set Program 20-03-04 to “1”.
These programs must be set in order for Aspire Wireless
users to be able to break dial tone on an analog trunk that
is used for paging.
0 = Receive all dialed
data, before sending.
1 = Direct through out
0 20-03-04