Filter
Top Products
Program 20 : System Option Setup
20-25 : ISDN Options
Aspire Software Manual Programming ◆ 1007
20-25 : ISDN Options
Description
Use Program 20-25 : ISDN Options to define the ISDN system options.
Input Data
Level:
Aspire S Aspire M/L/XL
IN
• Available. • Available.
• Option 14 available with 2.63+ software • Option 14 available with 2.63+ software.
Item No. Item Input Data Default
01 Send the Release Message After Subscriber
Hangs Up
0 = Service Off
1 = Service On
1
02 Progress Indicate Information Element Detect 0 = Service Off
1 = Service On
1
03 Bearer Capability Select from SLT Outgoing 0 = 3.1KHz Audio
1 = Speech
0
04 Send DT Until User Dials the First Digit
(Overlap Sending Mode)
With Overlap Sending Mode, if the network
side stops dial tone when CLI is included in the
SETUP message, the system sends dial tone
until the user dials the first digit instead of the
network.
0 = Service Off
1 = Service On
0
05 T305 Timer Start After Sending Disconnect
Message
0 = Service Off
1 = Service On
0
06 Call Proceeding Send Mode 0 = Service Off
1 = Service On
0
07 Local Busy Tone Mode Set When Disconnect
Message Received
0 = Local Busy
Tone Off
1 = Busy Tone from
NT (network side)
0
08 Use of Low Layer Compatibility (LLC) 0 = Disable
1 = Enable
1
09 Use of High Layer Compatibility (HLC) Send-
ing
0 = Disable
1 = Enable
1
10 S-Point Terminal Seizes Analog Trunk 0 = Disable
1 = Enable
0
11 Automatic Changing System Clock When
Date/Time Information Element Received
0 = Disable
1 = Enable
0