Filter
Top Products
Charts and Illustrations
14 ◆ Features Aspire Software Manual
823 Enabling Forced Ringing for
incoming Intercom calls
Handsfree Answerback/
Forced Intercom Ringing
-
824 Enabling/disabling Dial Pad
Confirmation Tone
Dialing Pad
Confirmation Tone
-
825 Turning Background Music on
and off
Background Music 04
827 + 1 or 2 + time, or 827 + 1 or
2 + 9999 to cancel
Checking, setting or canceling an
alarm
Alarm -
828 + hour + minutes Setting the system Time Time and Date -
829 Checking or changing ring
volume
Volume Control
830 Remote maintenance - -
832 Placing a call on Group Hold Hold -
833 + Line number (001-200) Setting Automatic Trunk For-
warding (following Program 24-
04-01 destination).
Call Forwarding, Off-
Premise
Transfer,
Tandem Trunking
834 + Line number (001-200) Cancelling Automatic Trunk For-
warding when activated by ser-
vice code 833.
Call Forwarding, Off-
Premise
Transfer,
Tandem Trunking
835 + Line number (001-200) +
time mode (1-8)
Setting and cancelling Auto-
matic Trunk Forwarding.
Call Forwarding, Off-
Premise
Transfer,
Tandem Trunking
840 System alarm message delete - -
847 +
0 (Cancel)
1 (Trk calls)
2 (Paging, ICM, Call Forward
and transfers)
3 (All calls)
4 (Call Forwards)
Activating Do Not Disturb Do Not Disturb -
849 Placing a call on Exclusive Hold
at a SLT set.
Hold -
850 Camping On to an extension
when calling into the system
through the VRS
Voice Response System
(VRS)
35
Table 3: Service Codes by Number
Dial this Service Code. . .
1
When you are. . . For this feature. . .
Also see
Function
Key. . .
1
Except where indicated, dial Service Code from Intercom dial tone
(e.g., press idle CALL key first).