Filter
Top Products
Door Box
324 ◆ Features Aspire Software Manual
➻ 10-21-01 : NTCPU Hardware Setup - External Source Control Switch Selection on
NTCPU
Specify the function of the NTCPU’s relay switch for external tone source control (0=Exter-
nal MOH source, 1 = BGM source, 2 = External Speaker, 3 = General Purpose Relay). Refer
to Program 10-05-01 for PGDAD Module relay assignments
➻ 32-01-01 : Door Box Timers - Door Box Answer Time
Set the interval within which a user must answer the Door Box chimes.
➻ 32-01-02 : Door Box Timers - Door Lock Cancel Time
Set the length of time the Door Box strike stays open when the single line user hook flashes or
keyset user presses Flash.
➻ 32-02-01 : Door Box Ring Assignments
Determine which Door Boxes should ring which extensions by entering the extension number.
Each Door Box can be programmed to ring up to 32 extensions and an extension can be pro-
grammed to ring for multiple Door Boxes.
➪ Aspire S: Door Boxes 1-4
➪ Aspire: Door Boxes 1-8
➻ 32-03-01 : Door Box Basic Setup - Chime Pattern
Set the chime pattern (0-6) for each Door Box.
➻ 32-03-02 : Door Box Basic Setup - CODEC Transmit Gain Setup
32-03-03 : Door Box Basic Setup - CODEC Receive Gain Setup
Select the CODEC gain types (1-63) each Door Box.
➪ Aspire S: Door Boxes 1-4
➪ Aspire: Door Boxes 1-8
➻ 80-01-01 : Service Tone Setup - Tones 19-24
Adjust the Door Box chimes if necessary. After changing this program, a system restart is
required for any changes to take affect.
Related Features
Call Forwarding, Off-Premise
Off-Premise Call Forwarding will work for ISDN lines.
Cordless II/Cordless Lite II Telephones
Door Boxes can ring Cordless II and Cordless Lite II phones if allowed in programming.
Paging, External
If a 2PGDAD circuit has a Door Box connected, you cannot use that circuit for External Paging.
Single Line Telephones, Analog 500/2500 Sets
Door Boxes can ring 2500-type single line phones if allowed in programming.