Filter
Top Products
Tandem Trunking (Unsupervised Conference)
548 ◆ Features Aspire Software Manual
➻ 20-07-11 : Class of Service Options (Administrator Level) - Forced Trunk Disconnect
In an extension’s Class of Service, enter 1 to enable Forced Trunk Disconnect. This allows the
extension to disconnect an Unsupervised Conference in progress (initially set up using Method B).
➻ 20-11-14 : Class of Service Options (Hold/Transfer Service) - Trunk-to-Trunk Transfer
Disable (0) the Trunk-to-Trunk Transfer Restriction option.
➻ 20-11-21 : Class of Service Options (Hold/Transfer Service) - Restriction for Tandem
Trunking on Hang Up
Deny (1) an extension user’s ability to set up a tandem call automatically when they hang up.
➻ 20-13-10 : Class of Service Options (Supplementary Service) - Barge In Mode
In an extension’s Class of Service, set whether an extension should be able to Barge In to a
call and talk (1) or just monitor the call (0).
➻ 24-02-07 : System Options for Transfer - Forced Release for Trunk-to-Trunk Transfer
This timer will start when a trunk begins talking with another trunk (for example: trunk-to-
trunk transfer, outgoing from trunk, Tandem Trunking) (0-64800).
➻ 25-07-07 : System Timers for VRS/DISA - DISA/Tandem Trunking Long Conversation
Warning Tone Time
Determine the length of time a DISA caller or any trunk-to-trunk (such as Tandem Trunking)
conversation can talk before the Long Conversation tone is heard (0-64800 seconds).
➻ 25-07-08 : System Timers for VRS/DISA - DISA/Tandem Trunking Long Conversation
Disconnect
This timer determines how long the system will wait before disconnecting a DISA or any
trunk-to-trunk (such as Tandem Trunking) call after the Long Conversation tone is heard (0-
64800 seconds).
Tandem Trunking Method C - Tandem Trunking on Hang up
➻ 10-07-01 : Conversation Record Circuits
The number of circuits assigned as Conversation Record circuits limits the number of avail-
able Conference circuits. Make sure there are circuits available for Conference.
➻ 14-01-04 : Basic Trunk Data Setup - Transmit Gain Level for Conference and Transfer Calls
Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
➻ 14-01-05 : Basic Trunk Data Setup - Receive Gain Level for Conference and Transfer Calls
Select the CODEC gain type used by the trunk when it is part of an Unsupervised Conference.
➻ 14-01-13 : Basic Trunk Data Setup - Loop Disconnect Supervision
For each trunk, enter 1 to enable loop supervision.
➻ 20-06-01 : Class of Service for Extensions
Assign a Class of Service (1-15) to an extension.
➻ 20-07-11 : Class of Service Options (Administrator Level) - Forced Trunk Disconnect
In an extension’s Class of Service, enter 1 to enable Forced Trunk Disconnect. This allows the
extension to disconnect an Unsupervised Conference in progress (initially set up using Method B).
➻ 20-11-14 : Class of Service Options (Hold/Transfer Service) - Trunk-to-Trunk Transfer
Disable (0) the Trunk-to-Trunk Transfer Restriction option.
➻ 20-11-21 : Class of Service Options (Hold/Transfer Service) - Restriction for Tandem
Trunking on Hang Up
Allow (0) an extension user’s ability to set up a tandem call automatically when they hang up.
➻ 24-02-07 : System Options for Transfer - Forced Release for Trunk-to-Trunk Transfer
This timer will start when a trunk begins talking with another trunk (for example: trunk-to-
trunk transfer, outgoing from trunk, Tandem Trunking) (0-64800).