Filter
Top Products
Automatic Route Selection
Aspire Software Manual Features ◆ 141
➻ Program 26-02 for Dial Analysis Table for ARS/LCR set as:
➻ Program 26-03-01 for ARS Dial Treatments set as:
Table No. 1 - Dial Treatment: A1RE
➻ Program 26-11-01 for Transit Network ID Table set as:
Table No. 1 - Transit Network ID: 0288
Example: If an extension dialed '9+(203)925-5400', the setup message will contain the Transit Net-
work Selection IE with Network ID 0288.
Example: If an extension dialed '9+(214)262-2000', the setup message will not contain the Transit
Network Selection IE.
Conditions
(A.) Do not use ARS behind a Centrex/PBX if Centrex features are used.
(B.) ARS is intended for areas that use the North American Number Plan (NANP).
(C.) Line keys, outgoing loop keys, outgoing trunk group keys, dialing 804+trunk group, dialing
#9+trunk number, and abbreviated dial numbers assigned to a certain trunk group can all be
used to by-pass ARS.
(D.) With software prior to 2.63, an entry of ’0’ in the ARS Table COS means it will ignore the
telephone’s Class of Service. With software 2.63 and higher, an entry of ’0’ in the ARS Table
COS will only match the telephone’s COS ‘0’.
Default Setting
ARS is not programmed.
Programming
➻
11-01-01 : System Numbering
Set the system’s internal (Intercom) numbering plan. The numbering plan assigns the first and
second digits dialed and affects the digits an extension user must dial to access other exten-
sions and features, such as service codes and trunk codes. If the default numbering plan does
not meet the site requirements, use this program to tailor the system numbering to the site.
➻ 11-09-01 : Trunk Access Code
Specify the single digit code used to access ARS (normally 9).
➻ 14-05-01 : Trunk Groups
Program trunks of the same carrier type into the same trunk group.
➻ 14-07-01 : Trunk Access Map Setup
Set up the Trunk Access Maps. This sets the access options for trunks.
➪ Aspire S: Trunk Access Maps 1-8
➪ Aspire: Trunk Access Maps 1-200
➻ 15-06-01 : Trunk Access Map for Extensions
Assign Trunk Access Maps to extensions.
➪ Aspire S: Trunk Access Maps 1-8
➪ Aspire: Trunk Access Maps 1-200
Table
No.
Program 26-02-01
Dial
Program 26-02-02
Service Type
Program 26-02-03
Add Data
Program 26-02-04
ARS COS
Program 26-02-05
Dial Treatment
1 203@@@@@@@ 1:TRG 1(Group 1) 0 1
2 @@@@@@@@@@ 1:TRG 1(Group 1) 0 0