Filter
Top Products
Charts and Illustrations
Aspire Software Manual Features ◆ 29
Conference,
Voice Call
Code: 32
Operation: Set up trunk
call + Press key
Setting up a Voice Call
Conference
None -
Data
Communications
Code: 66
Operation: Press key +
ext or outside number
Placing a data call On red when call
set up
-
Department Calling Code: 46
Operation: Press Key
Logging in or logging out of
your Department Calling
Group
On when removed,
Off when installed
150
Department Step
Calling
Code: 36
Operation: Dial busy ext
+ Press key
Step Calling through a
Department Group for an idle
member
None #
Direct Station
Selection / One-
Touch Calling
Code: 01
Operation: Press key +
dest. ext. or outside tel. #
+ HOLD
Calling an extension or out-
side number using a DSS key
Off = extension idle
On = extension busy
Flashing = DND
-
Do Not Disturb Code: 03
Operation: Press key +
code (0-4)
Setting your phone in DND DND key on red -
Do Not Disturb/Call
Forward Override
Code: 37
Operation: Press key
Calling an extension which is
in DND or Call Forwarded
None -
General Purpose
Relay
Code: 51 + relay number
Operation: Press key
Activating the general pur-
pose relay
On when active -
Group Call Pickup Code: 24
Operation: CALL +
Press key
Answering a call ringing
another phone in your Pickup
Group
None *#
Code: 25
Operation: CALL +
Press key
Answering a call ringing a
phone in another Pickup
Group - if you don’t know the
group number
None 869
Code: 26 + Pickup Group
(1-8 or 1-9 or 01-64)
Operation:
CALL +
Press key + Pkup Group
Answering a call ringing a
phone in a specific Pickup
Group
None 868
Handset Cutoff Code: 40
Operation: Press key
Cutting off the handset trans-
mission while on a call
On when feature
active (no transmis-
sion on handset)
-
Headset Operation Code: 05
Operation: Press key
Enabling or disabling
Headset Operation
On red when
activated
834
Table 5: Function Key Codes by Features
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter the
code (e.g., 48 for Voice Over).
For this feature... Use this key... When your are... Key Lamp Status
Also See
Srvc Code