Filter
Top Products
Program 20 : System Option Setup
20-09 : Class of Service Options (Incoming Call Service)
974 ◆ Programming Aspire Software Manual
20-09 : Class of Service Options (Incoming Call Service)
Description
Use Program 20-09 : Class of Service Options (Incoming Call Service) to define the incoming
call feature availability for each extension’s Class of Service.
Input Data
Level:
Aspire S Aspire M/L/XL
IN
• Available. • Available.
• Item 6 requires software 2.67+. • Item 6 requires software 2.67+.
Class of Service Number 01-15
Item
No.
Item
Input
data
Default
Related
Program
COS
01-14
COS 15
01 Second Call for DID/ DISA/ DIL/ E&M
Turn off or on the extension’s ability to receive a second
call from a DID, DISA, DIL, or tie line caller.
Note: With this option set to ‘1’, the destination extension
must be busy in order for a second DNIS caller to ring
through. If the destination extension does not have a line or
loop key available for the second call and a previous call is
ringing the extension but has not yet been answered, the sec-
ond caller will hear busy regardless of this program’s setting.
0 = Off
1 = On
00
02 Caller ID Display
Turn off or on the Caller ID display at an extension.
0 = Off
1 = On
0 0 15-02-08
03 Sub Address Identification
Define whether an extension displays the Caller
Sub-Address.
0 = Off
1 = On
00
04 Notification for Incoming Call List Existence
Determine whether an extension’s display will show
“Check List” when an incoming call has been missed by a
user.
0 = Off
1 = On
0 0 20-09-02
05 Setting Handsfree Answerback or Forced Intercom
Ringing
Turn off or on an extension’s ability to enable Handsfree
Answerback or Forced Intercom Ringing for their incom-
ing Intercom calls.
0 = Off
1 = On
1 1 11-11-15,
11-11-16
06 Incoming Time Information Display
If this option is set to “1”, the Incoming Call Time is dis-
played on the keyset’s LCD while the phone is ringing.
0 = Off
1 = On
00