Filter
Top Products
Cordless II/Cordless Lite II Telephones
Aspire Software Manual Features ◆ 257
➻ 15-02-11 : Multi-Line Telephone Basic Data Setup, Callback Automatic Answer
This item should be set to ‘1’ to enable automatic answer for Callbacks.
➻ 15-07-01 : Programmable Functions Keys
Assign a loop key to one of the function keys. The system default setting has the function keys
programmed for lines1 - 4 (code *01 + trunk number). By assigning a loop key, all required
lines can be accessed (enter code *05 + 0 [Incoming], 1 [Outgoing], or 2 [Both]).
➪ Aspire S Trunk: 1-8
➪ Aspire Trunk: 1-100
➻ 15-02-24 : Multi-Line Telephone Basic Data Setup - Conference Key Mode
This option allows an extension’s CONF key to be programmed for Conference or for Transfer.
➻ 15-13-01 : Loop Keys - Outgoing
Assign trunk groups for outgoing loop keys (0=ARS, Aspire S Trunk Groups 1-8, or Aspire Trunk
Groups 1-100).
➻ 15-13-02 : Loop Keys - Incoming
Assign trunk groups for incoming loop keys (0=all Trunk Groups, Aspire S Trunk Groups 1-8, or
Aspire Trunk Groups 1-100).
➻ 22-04-01 : Incoming Extension Ring Group Assignment
Assign the cordless phone’s extension to a Ring Group.
➪ Aspire S Ring Groups: 1-8
➪ Aspire Ring Groups: 1-100
➻ 31-02-01 : Internal Paging Group Assignment
Do not place a Cordless extension into a paging group, otherwise it will ring when a Page is
made by another user.
Related Features
Background Music
Do not set Background Music for the Cordless phone (Service Code 825). This made cause
the phone to ring when it is in an idle state.
Dial Number Preview
If the telephone number is not entered and dialed within 10 seconds, the phone returns to an
idle state.
Door Box
For a cordless phone use to use the relay, Program 15-02-05 must be set to “2”.
E911 Compatibility
The Cordless phone cannot receive E911 notification.
Intercom
Cordless phones should not have voice announce selected. Intercom calls should only ring the
extension. Use Service Code 823 to set an extension to ringing (Program 11-11-16).