Filter
Top Products
Aspire XL
Aspire Software Manual Features ◆ 109
Aspire XL
Description
To enhance the Aspire system, which previously only supported 256 digital/analog extensions (not
including IP and Wireless), the Aspire XL system is now available. The Aspire XL uses a new
power supply cabinet, new power supplies, and 32ESIU PCB to provide the ability to support up to
384 digital/analog extensions (TDM/legacy telephones). The total number of phones (legacy + IP/
Aspire Wireless) supported is still 512.
The Aspire XL uses the same hardware as the existing Aspire M/L system except for the new hard-
ware indicated below.
● Power Supply Set (IP1WW-XLPSU-A(SET) / New power supply) - Kit P/N 0890069
This kit includes the following:
● IP1WW-PSADU-A1 (AC/DC Unit for the XL Power Supply) - P/N 0892011
Two AC/DC Power Supplies maximum per Power Supply Cabinet.
When two AC/DC Power Supplies are installed, two separate AC cords
will each require an AC outlet connection from the bottom Power Supply Cabi-
net. Use the power cords included with the Aspire system cabinet(s) for con-
necting the power supplies to the AC outlet. The Aspire system cabinet is no
longer directly connected to an AC outlet with the AC/DC Power Supplies
installed.
● IP1WW-PSDDU-A1 (DC/DC Unit for the XL Power Supply) - P/N 0892012
Two DC/DC Converters maximum per system - one in each system cabinet.
A DC/DC Converter replaces the two power supplies used in the cabinet
of the Aspire M/L system (P/N 0891000).
If an Aspire M/L system is upgraded to an Aspire XL, the existing power sup-
plies will no longer be required as they are replaced by the DC/DC Converter.
● IP1WW-XLPS Cable for Power (connects the AC/DC Unit and DC/DC Unit) -
P/N 0892013
This cable allows for a power connection from one AC/DC Supply in the
bottom cabinet to one DC/DC Converter in the system cabinet.
Note: The power cord for the system cabinet (located on the back of the
cabinet) is no longer required with this cable connection.
● IP1WW-XLPS Cable for Signal (connects the AC/DC Unit and DC/DC Unit) -
P/N 0892010
This cable allows for a signal connection from one AC/DC Supply in the
bottom cabinet to one DC/DC Converter in the system cabinet.
Aspire S Aspire M/L/XL
• N/A • Aspire XL available with software 4.0E+.