Filter
Top Products
Prime Line Selection
Aspire Software Manual Features ◆ 477
Programming
➻
14-05-01 : Trunk Groups
Assign Prime Line to a separate trunk group for outgoing Prime Line selection. (Also see 14-06
and 21-02.)
➻ 14-06-01 : Trunk Group Routing
Set up outbound route for trunk group that contains the Prime Line. (Also see 14-05 and 21-02.)
➪ Aspire S: Trunk Group Routing 1-8
➪ Aspire: Trunk Group Routing 1-100
➻ 14-07-01 : Trunk Access Map Setup
For outgoing Prime Line selection, assign each Prime Line trunk to a different Access Map and
deny outbound access to all trunks except the Prime Line trunk.
➪ Aspire S: Trunks 1-8
➪ Aspire: Trunks 1-200
➻ 15-01-02 : Basic Extension Data Setup - Outgoing Trunk Line Preference
Enter 1 for this option so extension user seizes Prime Line when they lift the handset.
➻ 15-02-10 : Multi-Line Telephone Basic Data Setup - Ringing Line Preference for Trunk Calls
Enter 1 if lifting the handset should answer ringing Prime Line; enter 0 to seize idle line
appearance.
➻ 15-06-01 : Trunk Access Map for Extensions
Set assignment so extension(s) can have access to Prime Line. Deny outbound access to
extensions that should not have Prime Line.
➪ Aspire S: Trunks 1-8
➪ Aspire: Trunks 1-200
➻ 21-02-01 : Trunk Group Routing for Extensions
Assign extension(s) to a Prime Line route for outgoing Prime Line access.
➪ Aspire S Trunk Groups: 1-8
➪ Aspire Trunk Groups: 1-100
➻ 22-01-01 : System Options for Incoming Calls - Incoming Call Priority
Set incoming Prime Line preference. Enter 1 to answer ringing Prime Line; enter 0 to answer
ringing Intercom call.
➻ 22-04-01 : Incoming Extension Ring Group Assignment
Assign extension(s) to a ring group that consists of a Prime Line.
➪ Aspire S Ring Groups: 1-8
➪ Aspire Ring Groups: 1-100
➻ 22-05-01 : Incoming Trunk Ring Group Assignment
Assign a Prime Line to a ring group.
➪ Aspire S Ring Groups: 1-8
➪ Aspire Ring Groups: 1-100