Filter
Top Products
Program 90 : Maintenance Program
90-11 : System Alarm Report
1520 ◆ Programming Aspire Software Manual
90-11 : System Alarm Report
Description
Use Program 90-11 : System Alarm Report to define the details of the system alarm report.
Input Data
Level:
Aspire S Aspire M/L/XL
IN • Available. • Available.
Item No. Item Input Data Default
01 System Alarm Display Telephone
Assign the display keyset extension number
that should receive system alarms.
Extension Number
(Up to 8 digits)
No setting
02 Report Method
When alarm reports are to be EMailed, set
this option to “1”.
0 = No report
1 = EMail Address
0
04 - Not Used - -0
06 SMTP Host Name
When alarm reports are to be EMailed, set
the SMTP name (ex: smtp.yourisp.com) or
IP address. Contact your ISP (internet ser-
vice provider) for the correct entry if
needed.
Up to 255 Characters No setting
07 SMTP Host Port Number
When alarm reports are to be EMailed, set
the SMTP host port number. Contact your
ISP (internet service provider) for the cor-
rect entry if needed.
0-65535 25
08 To EMail Address
When alarm reports are to be EMailed, set
this EMail address to which the report
should be sent.
Up to 255 Characters No setting
09 Reply Address
When alarm reports are to be EMailed, set
this EMail address to which any replies
should be EMailed.
Up to 255 Characters No setting
10 From Address
When alarm reports are to be EMailed, set
this EMail address from which the report is
being sent. This entry is required for EMail-
ing alarms.
Up to 255 Characters No setting
11 DNS Primary Address
When alarm reports are to be EMailed, set the
DNS primary address.
0.0.0.0-255.255.255.255 0.0.0.0