Filter
Top Products
Park
Aspire Software Manual Features ◆ 471
To park a call at your extension:
1. Do not hang up.
2. Press the Personal Park key (PGM 15-07 or SC 852: *07).
OR
Press HOLD and dial 857.
OR
Press HOLD + Press the Personal Park key (PGM 15-07 or SC 852: *07).
At a 500/2500 SLT, hookflash instead of pressing HOLD.
A confirmation tone is heard and the call is parked at your extension. If the extension
has a Personal Park key, the key will flash.
The Personal Park single-digit service code (PGM 11-16-11) cannot be used in this
operation.
3. Page your co-worker to pick up the call.
4. Press SPK to hang up (or hang up at SLT).
If not picked up, the call will recall to you.
To Park an outside call at your extension after trying to call a co-worker:
1. While on a call, press HOLD.
2. Dial a co-worker’s extension number.
The co-worker does not answer.
3. Press the Personal Park key (PGM 15-07 or SC 852: *07).
OR
Dial the Personal Park single digit code (PGM 11-16-11).
The Intercom call to the co-worker is dropped. A confirmation tone is heard and the
outside call is parked at your extension.
If the co-worker answers the call, the outside call will ring back once the intercom call
is completed. The call can then be placed in Personal park if desired.
To pick up a call parked at your extension:
1. Press the Personal Park key (PGM 15-07 or SC 852: *07).
OR
Press idle CALL key and dial 857.
At an SLT, skip pressing CALL.
The Personal Park single-digit service code (PGM 11-16-11) cannot be used in this
operation.
If it recalls the extension, pressing the Personal Park key or flashing CALL key will
answer the call.
The Personal Park single-digit service code (PGM 11-16-11) cannot be used in this
operation.
To answer a call parked at a co-worker’s extension:
1. Press the CALL key, dial ** plus the co-worker’s extension number.
At an SLT, skip pressing CALL.