Filter
Top Products
Center Telephone Book
Aspire Software Manual Features ◆ 203
Registering Caller ID to the Center Telephone Book
While reviewing the Caller ID list, a user can add a record into the Center Telephone Book with the
following operation. This function can only be performed if the Center Telephone Book is
unlocked.
1. From an idle keyset, press Soft Key 1 for List.
2. Press Soft Key 2 for CID.
3. Use the Arrow Up and Arrow Down Soft Keys to display the desired Caller ID record.
4. Press Soft Key 3 for Store.
5. Press Soft Key 3 for TELBK.
6. If 2 Telephone Books are defined in Program 15-19-01 and 15-19-02:
Press Soft Key 1 or 2 to select the Telephone Book in which the number should be stored.
7. To enter/change the name, press HOLD and enter the new name. Press HOLD.
8. Enter the group number. Press HOLD, then using the dial pad, select the group number to be
assigned. The display flashes the saved telephone number - press HOLD.You can now change
the telephone number, then press HOLD. At the ENTER REGIST MEMORY display, press
HOLD. Select the new memory number to be used for the number and press HOLD. If the
memory number selected was already defined, press Soft Key 3 to overwrite the current infor-
mation or press Soft Key 4 to cancel and allow you to select a new memory number. You can
now select a new entry to edit or press CONF to back up the displayed window.
01: ABC1
* MM-DD HH:TT
OneT ABB TELBK
01: ABC1
* MM-DD HH:TT
TLBK1 TLBK2
TLBK1 :NEW REGIST
N:ABC
G: