Filter
Top Products
Handsfree Answerback/Forced Intercom Ringing
346 ◆ Features Aspire Software Manual
Handsfree Answerback/Forced Intercom Ringing
Description
Handsfree Answerback permits an extension user to respond to a voice-announced Intercom call by
speaking toward the phone, without lifting the handset. Like Handsfree, this is a convenience for
workers who don’t have a free hand to pick up the handset.
Conditions
Handsfree Answerback does not require a Speakerphone.
Default Setting
Enabled.
Programming
➻
11-11-15 : Service Code Setup (for Setup/Entry Operation) - Enable Handsfree Incom-
ing Intercom Calls
If required, change the service code used for setting an extension to voice announce for
incoming ICM calls (default: 821).
➻ 11-11-16 : Service Code Setup (for Setup/Entry Operation) - Force Ringing of Incoming
Intercom Calls
If required, change the service code used for setting an extension to forced rining for incom-
ing ICM calls (default: 823).
➻ 11-12-06 : Service Code Setup (for Service Access) - Switching of Voice Call and Signal
Call
If required, change the service code used for toggling an outgoing ICM call between a voice
call and signal call (default: 812). Program 11-16-09 (Single Digit Voice Mail code) must be
deleted or changed from the default entry of “8” for this service code to work.
➻ 20-02-12 : System Options for Multi-Line Telephones - Forced Intercom Ringing
Enable (1) or disable (0) Forced Intercom Ringing. If disabled (0), Intercom calls voice-
announce.
➻ 20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
➻ 20-08-10 : Class of Service Options (Outgoing Call Service) - Switching from Handsfree
Answerback to Forced Intercom Ringing
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to toggle
between Handsfree Answerback and Forced Intercom Ringing for outgoing Intercom calls
(dial 1 or Service Code 812).
➻ 20-09-05 : Class of Service Options (Incoming Call Service) - Setting Handsfree Answer-
back/Forced Intercom Ringing
In an extension’s Class of Service, enable (1) or disable (0) an extension’s ability to set
Handsfree Answerback (Service Code 821) and Forced Intercom Ringing (Service Code 823)
for incoming Intercom calls.
Aspire S Aspire M/L/XL
• Available. • Available.