Filter
Top Products
Charts and Illustrations
Aspire Software Manual Features ◆ 37
Code: 33
Operation: Call
ext. and receive busy
+ Press key
Off Hook Signaling Signaling a busy extension None 7 or
809
Code: 34
Operation: Call ext
+ Press key
Barge In Barging In on a co-worker’s
conversation
None 810
Code: 35
Operation: Call
busy extension or
access busy trunk +
Press key
Callback / Camp On /
Trunk Queuing
Leaving a Callback request at
a busy extension, Camping
On to a busy extension,
Queuing for a busy trunk
On red when
activated
2 or 850
Code: 36
Operation: Dial
busy ext + Press key
Department Step Calling Step Calling through a
Department Group for an idle
member
None # or 808
Code: 37
Operation: Call
extension + Press
key
Call Forwarding / Do Not
Disturb Override
Overriding an extension’s
Call Forwarding or Do Not
Disturb
On red when
activated
807
Code: 38
Operation: Leave
message: Call ext +
Press key OR
Answer message:
Press key
Message Waiting Answering/Leaving a
Message Waiting
None *0 or
0
Code: 39
Operation: Press
key at destination
and source + ext
Room Monitor Activating Room Monitor Fast Flash red at
destination, Hold
Flash red at source
-
Code: 40
Operation: Press
key
Handset Cutoff Cutting off the handset trans-
mission while on a call
On when feature
active (no transmis-
sion on handset)
-
Code: 41 + sec. ext.
Operation: Press
key
Secretary Call Calling your secretary (using
the buzzer)
On red at source
Fast Flash red at
destination
-
Code: 42 + boss ext.
Operation: Press
key
A secretary picking up a call
ringing your boss’s extension.
On red when
activated
-
Code: 43
Operation: TRK
call + Hold + ext +
Press key
Serial Call Placing a Serial Call to a
co-worker
None -
Table 6: Function Key Codes by Number
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter the
code (e.g., 48 for Voice Over).
Use this key... For this feature... When you are... Key Lamp Status
Also see
Srvc Code