Filter
Top Products
Conference
242 ◆ Features Aspire Software Manual
➻ 11-12-58 : Service Code Setup (for Service Access) - Transfer Into Conference
If required, change the service code used to transfer a call into a Conference call (default:
124).
➻ 11-16-02 : Program 11-16 : One-Digit Service Code Setup - Barge In
If required, use this program to define the single digit service code users dial to Barge In to a
Conference call.
➻ 14-01-04 : Basic Trunk Data Setup - Transmit Gain Level for Conference and Transfer
Calls
CODEC gain set at 0 dB (14-01-04 = 32) can be used to set the CODEC gain type for multi-
line Conference calls.
➻ 15-02-24 : Multi-Line Telephone Basic Data Setup, Conference Key Mode
This option allows an extension’s CONF key to be programmed for Conference or for Trans-
fer. When set for Transfer (1), the user places a call on hold, dials the extension to which it
should be transferred, the presses the CONF key. The call is then transferred. When set for
Conference (0), with an active call, the user presses the CONF key, places a second call, then
presses the CONF key twice. All the calls are then connected.
➻ 15-07-01 : Programming Function Keys
Assign a function key for Conference (code 07).
➻ 20-06-01 : Class of Service for Extensions
Assign a Class Of Service (1-15) to an extension.
➻ 20-11-21 : Class of Service Options (Hold/Transfer Service) - Restriction for Tandem
Trunking on Hang Up
Allow (0) or deny (1) an extension user’s ability to set up a tandem call automatically when
they hang up. By default, this option is allowed (0).
➻ 20-13-08 : Class of Service Options (Supplementary Service) - Conference
In an extension’s COS, enable (1) or disable (0) the extension’s ability to initiate a Conference.
➻ 20-13-15 : Class of Service Options (Supplementary Service) - Barge In Initiate
In an extension’s COS, enable (1) or disable (0) the extension’s ability to Barge In to a call.
➻ 20-13-16 : Class of Service Options (Supplementary Service) - Barge In Receive
In an extension’s COS, enable (1) or disable (0) the extension’s ability to receive a Barge In on a
call.
➻ 20-14-11 : Class of Service Options For DISA/E&M - DISA/Tie Trunk Barge In
Determine if DISA and tie trunk users should have the ability to dial a service code to Barge
In to a Conference call (0=disabled, 1=enabled).
Related Features
Barge In
Users can Barge In on a Conference call if allowed in programming.
Central Office Calls, Placing
Define the outgoing call options for each trunk and user.
Conference, Voice Call
Set up a Conference with a co-worker in your immediate work area.
Direct Inward System Access (DISA) / Tie Lines
DISA and tie line users may use the Barge In feature on a Conference call if they know the
service code and are permitted in their DISA/Tie Line Class of Service.
Meet Me Conference
Meet Me Conference lets an extension user set up a Conference via Paging.