Filter
Top Products
Program 11 : System Numbering
11-12 : Service Code Setup (for Service Access)
Aspire Software Manual Programming ◆ 825
Conditions
For “8xx” service codes used after dialing an extension (post-dialing), Program 11-16-09 (Single
Digit Voice Mail code) must be deleted or changed from the default entry of “8” for the service
codes to work.
Feature Cross Reference
Refer to chart above.
40 Personal Abbreviated Dialing KTS, SLT #7
41 Voice Over KTS 890 11-16-08
42 Flash on Trunk lines SLT #3
43 Universal Answer SLT #0 14-05
14-06
44 Callback Test for SLT SLT 899
45 Enabled On Hook When Holding (SLT) SLT 849 15-03-07
46 Answer On Hook When Holding (SLT) SLT 859 15-03-08
47 Call Waiting Answer / Split Answer
Splitting (switching) between calls
KST/SLT 894 11-12-03
48 Account Code SLT ##
49 Not Used - - - -
50 General Purpose Relay KST 880
51 Call Own Mailbox *8
52 Live Monitoring (VRS) No Setting
53 Live Recording at SLT SLT 154
54 VRS Routing for ANI/DNIS
Use when setting up ANI/DNIS Routing to the VRS
Automated Attendant. Using the Transfer feature, this
also allows a call to be transferred to the VRS.
882
56 E911 Alarm Shut Off
Enter the Service Code that an extension user can dial
to shut off the E911 Alarm Ring.
886 - 20-08-16
21-01-13
57 Unsupervised Conference/Tandem Trunking KST/SLT #8
58 Transfer Into Conference
Assign the Service Code users dial to Transfer a call
into a Conference call.
KST/SLT 124 20-13-10
20-13-15
20-13-16
Item
No.
Item Terminals Default New
Related
Program