Filter
Top Products
Program 15 : Extension, Basic Setup
15-08 : Incoming Virtual Extension Ring Tone Setup
Aspire Software Manual Programming ◆ 925
15-08 : Incoming Virtual Extension Ring Tone Setup
Description
Use Program 15-08 : Incoming Virtual Extension Ring Tone Setup to assign a ring tone range
(0-4) to incoming virtual extensions assigned to a Virtual Extension key (Program 15-07). If you
enable ringing for the key in Program 15-09, the key rings with the tone you set in this program.
Also see Program 22-03. The chart below shows the available tones.
Input Data
Level:
Aspire S Aspire M/L/XL
IN • Available - 24 virtual extension ports. • Available - 256 virtual extension ports.
Extension Number Max. 8 digits
Item
No.
Incoming Ring Pattern Default Description
01 0 = Tone pattern 1
1 = Tone pattern 2
2 = Tone pattern 3
3 = Tone pattern 4
4 = Incoming extension ring tone
0: Tone pattern 1 When an extension or a virtual extension is
assigned to the function key on the key telephone,
select the ring tone when receiving a call on that
key.
For ACD Call Coverage Keys, only tone pattern 1
(entry 0) can be used. The remaining patterns are
not checked with this feature.
Incoming Signal
Frequency
Pattern
Type Frequency 1 Frequency 2 Modulation
Pattern 1 High
Middle
Low
1100
660
520
1400
760
660
16Hz
16Hz
16Hz
Pattern 2 High
Middle
Low
1100
660
520
1400
760
660
8Hz
8Hz
8Hz
Pattern 3 High
Middle
Low
1100
660
520
1100
660
520
Envelope
Envelope
Envelope
Pattern 4 High
Middle
Low
1100
660
520
1100
660
520
No modulation
No modulation
No modulation
Internal Incoming Signal
Frequency
High
Middle
Low
1100
660
520
1400
760
660
8Hz
8Hz
8Hz