NEC 5 Wok User Manual


  Open as PDF
of 1614
 
Abbreviated Dialing
Aspire Software Manual Features 75
15-07-01 : Programming Function Keys
Assign a function key for Common Abbreviated Dialing (code 27 ) or Group Abbreviated
Dialing (code 28). You can program the key as either a general Abbreviated Dialing key or
you can choose to store a bin number with the function key. This key would then always dial
the associated bin number. If storing a bin number along with the code, do not store 0, 00 or
000. To bypass entering a bin number, press HOLD (HOLD is also required if programming
the function key using the service code 851).
20-06-01 : Class of Service for Extensions
Assign a Class of Service (1-15) to an extension.
20-07-04 : COS Options (Administrator Level) - Storing Abbreviated Dialing Entries
In an extension’s COS, allow (1) or prevent (0) the storing of Abbreviated Dialing entries (codes
853 and 854). Preventing this option will also prevent the user’s display from showing the tele-
phone number. This can be used when you want to prevent account codes from being displayed.
20-08-03 : COS Options (Outgoing Call Service) - Common Abbreviated Dialing
In an extension’s COS, enable (1) or disable (0) Common Abbreviated Dialing.
20-08-04 : COS Options (Outgoing Call Service) - Group Abbreviated Dialing
In an extension’s Class of Service, enable (1) or disable (0) Group Abbreviated Dialing.
30-03-01 : DSS Console Key Assignment
Assign an Abbreviated Dialing Service Code (27 or 28) plus a two-digit bin number to a DSS
Console key. For DSS Console Chaining, assign a DSS Console key as a DSS/One-Touch Key
(01) then add the additional data.
80-03-01 : DTMF Tone Receiver Setup
80-04-01 : Call Progress Tone Detector Setup
If required, modify the criteria for dial tone detection and call progress tone detection for out-
going Abbreviated Dialing calls.
81-01-16 : ATRU-LS Initial Data Setup - Pause Time
If Abbreviated Dialing numbers include a pause, the system uses this timer to determine the
length of the pause. This timer is enabled/disabled in 14-02-06.
Related Features
Account Codes
Abbreviated Dialing bins can contain stored Account Codes. Prevent them from being dis-
played using 20-07-04.
Automatic Route Selection
For systems with Automatic Route Selection, ARS selects the trunk for the call unless the user
preselects.
Central Ofce Calls, Placing
A user can implement Abbreviated Dialing only if their extension has outgoing access to trunks.
Dial Tone Detection
Refer to this feature for the specics on how the system handles Dial Tone Detection.
One-Touch Calling
An extension can have a One-Touch Key for Abbreviated Dialing operation.
PBX Compatibility
If you enter a PBX trunk access code in an Abbreviated Dialing bin, the system automatically
inserts a pause after the bin.
Programmable Function Keys
Function keys simplify Abbreviated Dialing operation.
Single Line Telephones
Single line telephones can only dial Common and Group Abbreviated Dialing numbers.