Filter
Top Products
Account Codes
84 ◆ Features Aspire Software Manual
To enter an Account Code for an incoming call:
This procedure is not available at SLTs.
1. Answer incoming call.
If Account Codes for Incoming Calls is disabled, the following steps will dial digits out
onto the connected trunk.
2. Dial *.
3. Enter the Account Code.
You can enter any code of the proper length. Incoming Account Codes cannot be
Forced or Verified.
4. Dial *.
To enter an Account Code while placing a trunk call:
If your system has Forced Account Codes, you must follow this procedure.
1. Access trunk for outside call.
You can access a trunk by pressing a line key or dialing a code. Refer to Central Office
Calls, Placing for more information.
With Forced Account Codes, you hear, “Please enter an Account Code.” Your display
shows: ENTER ACCOUNT CODE.
2. Dial *.
3. Dial your Account Code (1-16 digits, using 0-9 and #).
4. Dial *
If the system has Forced Account Codes and you don’t enter a code, your call cannot
go through. You can, however, dial ** to bypass Forced Account Code entry.
5. Dial number you want to call.
If you hear “stutter” dial tone after dialing the number, ARS is requesting you to enter
an ARS Authorization Code. Refer to the Automatic Route Selection feature for more infor-
mation on ARS Authorization Codes.
To enter an Account Code at a single line set:
1. Access trunk for outside call.
You can access a trunk by dialing a code. Refer to Central Office Calls, Placing for
more information.
With Forced Account Codes, you hear, “Please enter an Account Code.” Your display
shows: ENTER ACCOUNT CODE.
2. Dial *.
3. Enter Account Code (1-16 digits).
4. Dial *.
5. Dial number you want to call.
If you hear “stutter” dial tone after dialing the number, ARS is requesting you to enter
an ARS Authorization Code. Refer to the Automatic Route Selection feature for more infor-
mation on ARS Authorization Codes.