Filter
Top Products
Flexible System Numbering
334 ◆ Features Aspire Software Manual
Flexible System Numbering
Description
Flexible System Numbering lets you reassign the system’s port-to-extension assignments. This
allows an employee to retain their extension number if they move to a different office. In addition,
factory technicians can make comprehensive changes to your system’s number plan. You can have
factory technicians:
● Set the number of digits in internal (Intercom) functions. For example, extension numbers can
be up to eight digits long.
● Change your system’s Service Code numbers
● Assign single digit access to selected Service Codes
Talk to your sales representative to find out if this program is available to you.
You can also use Flexible System Numbering to change the system’s Trunk Group Routing code.
Although the default code of 9 is suitable for most applications, you can alter the code if needed.
For more information on the systems standard numbering, refer to Tables 1, 2, 3, 4 and 7 at the
beginning of this section.
The system provides a completely flexible system numbering plan. Refer to the chart below and the
Programming section for more details.
Aspire S Aspire M/L/XL
• Available. • Available.
Flexible System Numbering
Program Description
11-01 : System Numbering Set the system’s internal (Intercom) numbering plan. The num-
bering plan includes the digits an extension user must dial to
access features and other extensions.
11-09-01 : Trunk Access Code Assign the single-digit trunk access code (normally 9). This is
the code users dial to access Automatic Route Selection or
Trunk Group Routing.
11-10 : Service Code Setup (for System Administrator)
11-11 : Service Code Setup (for Setup/Entry Operation)
11-12 : Service Code Setup (for Service Access)
11-13 : Service Code Setup (for ACD)
11-14 : Service Code Setup (for Hotel)
11-15 : Service Code Setup, Administrative (for Hotel)
Customize the Service Codes.
11-16 : Single Digit Service Code Setup Assign the Single Digit Service Codes. these are the post-dial-
ing codes a user can dial after placing an Intercom call to a co-
worker.