Filter
Top Products
Station Message Detail Recording
526 ◆ Features Aspire Software Manual
Conditions
(A.) The SMDR report does not include Intercom calls.
(B.) The SMDR call buffer stores 500 calls. The buffer stores calls when the SMDR device is unavail-
able. When the buffer fills, the oldest record is deleted to allow the new record to be saved.
(C.) When SMDR reports are enabled using the same port as the Traffic Reporting feature (exam-
ple: 147), the SMDR blocks the Traffic reports. Unplugging the cable and plugging it back in
again will allow Traffic reports to print.
(D.) SMDR requires a connection to the NTCPU via a COM port, USB (Aspire only) or LAN con-
nection. A USB connection from the Aspire NTCPU requires the USB driver which can be
downloaded from the NEC Technical Support web site - ws1.necii.com.
The system can also use a connection to the system via a CTA/CTU adapter (the CTU adapter
also requires a USB driver which is also available on the web site). Once you designate a CTA
or CTU for SMDR, you cannot use that extension for placing and answering other data calls.
SMDR and the Traffic Reports should not use the same CTA/CTU.
(E.) If no answer is received, “NO ANSWER” is displayed regardless of the system programing for
the Caller ID display option.
(F.) The setting in Program 35-02-18 works regardless of the entry in Program 35-02-15 or 35-02-
17.
(G.) When Program 35-02-18 is set to "1", the first and second lines are sometimes separated.
When the buffer is full, the overflowed data may not be shown.
(H.) The special characters used in the Aspire system cannot be output to the SMDR - they are con-
verted to “_”.
Default Setting
Disabled.