Filter
Top Products
Program 25 : VRS/DISA Setup
25-06 : VRS/DISA One-Digit Code Attendant Setup
Aspire Software Manual Programming ◆ 1125
25-06 : VRS/DISA One-Digit Code Attendant Setup
Description
Use Program 25-06 : VRS/DISA One-Digit Code Attendant Setup to set up single digit dialing
through the VRS. This gives VRS callers single key access to extensions, the company operator,
Department Calling Groups and Voice Mail. For each VRS message set to answer outside calls (see
Program 25-04 and 25-05), you specify:
● The digit the VRS caller dials (0-9, *, #). (Keep in mind that if you assign destinations to dig-
its, outside callers will not be able to dial system extensions.
● The destination reached (eight digits max.) when the caller dials the specified digit.
The destination can be an extension, a Department Calling pilot number or the Voice Mail master
number. A one-digit code can be assigned for each Automated Attendant message.
Example:
Message Number=01, Destination=2, Next Message Number=0, Dial=399
In this example, when “2” is dialed by an outside caller, the system transfers the call to “399”. This
means that ext 200-299 cannot receive calls from VRS/DISA users during/after VRS Message 01.
Input Data
Conditions
Outside caller may not be able to dial individual extensions or lines if the same first digit is defined
here.
Feature Cross Reference
● Direct Inward System Access (DISA)
● Voice Response System (VRS)
Level:
Aspire S Aspire M/L/XL
IN • Available. • Available.
Attendant message number 01-48
Received dial 1-9,0,*,#
Item
No.
Item Input Data Default
01 Next Attendant Message Number 0-48 (0 = no setting) 0
02 Destination Number Up to 8 digits No setting