Filter
Top Products
Charts and Illustrations
34 ◆ Features Aspire Software Manual
Table 6: Function Key Codes by Number
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter the
code (e.g., 48 for Voice Over).
Use this key... For this feature... When you are... Key Lamp Status
Also see
Srvc Code
Code: 01 + dest. ext.
or outside tel # +
HOLD
Operation: Press
key
Direct Station Selection,
Hotline, One-Touch
Calling
Calling an extension or out-
side number using a DSS key
Off = extension idle
On = extension busy
Flashing = DND
-
Code: 02
Operation: Set up
call + Press key
Microphone Cutoff Using Microphone Cutoff On red when
activated
-
Code: 03
Operation: Press
key
Do Not Disturb Activating DND On red when
activated
-
Code: 04
Operation: Press
key
Background Music Turning BGM on or off On red when
activated
825
Code: 05
Operation: Press
key
Headset Operation Enabling or disabling
Headset Operation
On red when
activated
834
Code: 06
Operation: Estab-
lish call + Hold +
Ext + Press key
Transfer Transferring a call None -
Code: 07
Operation: Set up
call + Press key + set
up call to add +
Press key twice
Conference Setting up a conference or a
Meet Me Conference
On red during setup #1
Code: 08
Operation: Press
key
SMDR TBD
Flashing when new
log created
On in call log
-
Code: 09 + mode (0,
1-4 or 1-8)
Operation: Press
key
Night Service Activating the Day/Night
Mode
On red when
activated
818 + mode
(1-4 or 1-8)
Code: 10
Operation: Press
key + Dest. Ext.
Call Forwarding,
Immediate
Call Forwarding to extension
or Voice Mail
Slowly flashes red *2 + 4
Code: 11
Operation: Press
key + Dest. Ext.
Call Forwarding,
Busy
Call Forwarding to extension
or Voice Mail
Slowly flashes red *2 + 2