Filter
Top Products
Program 21 : Outgoing Call Setup
21-01 : System Options for Outgoing Calls
1012 ◆ Programming Aspire Software Manual
09 Ringdown Extension Timer
A Ringdown extension automatically calls its
programmed destination after this interval.
0-64800 Seconds 5 20-08-09
21-11
10 Dial Digits for Toll Restriction Path
If this option is programmed with an entry
other than “0”, a call will not have a talk path
unless the user dials at least the number of
digits entered in this option when placing an
outgoing call.
This means that an entry of 4 or higher in this
program will cause a problem when dialing
911. Since it is only a 3-digit number, the call
will not have a talk path, preventing the emer-
gency dispatcher from hearing the caller. It is
recommended that this option be kept at its
default setting of “0” to prevent any problems
with dialing 911.
0-24 0
11 Inter-Digit Time for Toll Restriction Path
Control
0-60 0
12 Dial 911 Routing Without Trunk Access
If enabled (1), an extension user can dial 911
without first dialing a trunk access code or
pressing a line key. If disabled (0), an exten-
sion user must dial a trunk access code (e.g.,
9) or press a line key before dialing 911.
0 = Trunk Access Code
Required
1 = Trunk Access Code
Not Required
1
13 Alarm Ring Timer (E911)
Use this option to set the duration of the E911
Alarm Ring Time. If set for 0, the E911
Alarm will not ring.
0, 1-64800 Seconds
(0 = Off)
0 11-12-56
20-08-16
14 Forced Account Code Inter-digit Timer
The system waits this interval for a user to
enter a Forced Account code.
0-64800 Seconds 3
15 Outgoing Disable on Incoming Line
Enable or disable the Outgoing Disable on
Incoming Line feature.
0 = Disable
1 = Enable
0
16 Supervise Dial Detection Timer
With the Outgoing Disable on Incoming Line
feature, if dial tone is not detected after the
extension answers an incoming line, the sys-
tem determines the call is unable to complete
and releases the DTMF receiver.
0-64800 Seconds 20
Item
No.
Item Input Data Default Related Program