Filter
Top Products
Central Office Calls, Placing
220 ◆ Features Aspire Software Manual
➻ 14-02-11 : Analog Trunk Data Setup - Next Trunk in Rotary if No Dial Tone
Use this option to enable (1) or disable (0) the system’s ability to skip over a trunk if dial tone
is not detected. This option pertains to calls placed using Loop Keys, Speed Dial, ARS, Last
Number Redial or Save Number dialed. It does not pertain to line key or Direct Trunk Access
calls.
➻ 14-02-14 : Analog Trunk Data Setup - Loop Start/Ground Start
Select loop start (0) or ground start (1) for the trunk.
➻ 14-05-01 : Trunk Groups
Assign trunks to Trunk Groups. You can also assign the outbound priority for trunks within
the group. When users dial up the trunk group, they seize the trunks in the order you specify in
the outbound priority entry.
➪ Aspire S: Trunks 1-8, Trunk Groups 1-8
➪ Aspire: Trunks 1-200, Trunk Groups 1-100
➻ 14-06-01 : Trunk Group Routing
Set up an outbound routing table for the trunk groups you assigned in Program 14-05. When
users dial 9, the system routes their calls in the order (priority) you specify.
➪ Aspire S: Trunk Routing Table 1-8
➪ Aspire: Trunk Routing Table 1-100
➻ 14-07-01 : Trunk Access Map Setup
Set up the Trunk Access Maps. This sets the access options for trunks.
➪ Aspire S: Trunk Access Maps 1-8
➪ Aspire: Trunk Access Maps 1-200
➻ 15-02-01 : Multi-Line Telephone Basic Data Setup
Select the language which should be used on a keyset’s display (0 = Japanese, 1 = English, 2 =
German, 3 = French, 4 = Italian, 5 = Spanish, 6 = Dutch, 7 = Portuguese, 8 = Norwegian, 9 =
Danish).
➻ 15-02-08 : Multi-Line Telephone Basic Setup - Automatic Handsfree
Determine whether or not an extension should have automatic handsfree by pressing a line or one-
touch key (1) or if this operation only preselects a line or one-touch key for use (0).
➻ 15-03-03 : Single Line Telephone Basic Data Setup - Terminal Type
Enter 1 for this option to allow a single line port to receive DTMF tones after the initial call
setup. Enter 0 to have the port ignore DTMF tones after the initial call setup. For Voice Mail,
always enter 1 (e.g., receive DTMF tones).
➻ 15-06-01 : Trunk Access Map for Extensions
Assign Trunk Access Maps to extensions.
➪ Aspire S: Trunk Access Maps 1-8
➪ Aspire: Trunk Access Maps 1-200
➻ 15-07-01 : Programming Function Keys
To simplify placing calls, assign function keys for placing trunk calls: Line keys (code *01 +
trunk), Trunk Group keys (code *02 + group), Loop keys (code *05 + enter 0 (incoming only), 1
(outgoing only) or 2 (both ways)).
➪ Aspire S: Trunks 1-8
➪ Aspire: Trunks 1-200
➻ 15-13-01 : Loop Keys - Outgoing
Assign trunk groups for outgoing loop keys (0=ARS, Aspire S Trunk Groups 1-8, or Aspire Trunk
Groups 1-100).
➻ 15-13-02 : Loop Keys - Incoming
Assign trunk groups for incoming loop keys (0=all Trunk Groups, Aspire S Trunk Groups 1-8, or
Aspire Trunk Groups 1-100).
➻ 20-02-06 : System Options for Multi-Line Telephones - Preselection Time
Set the preselection interval (0-64800 seconds). When a keyset user preselects a line key, the
system remembers the preselection for this interval.