Filter
Top Products
Program 11 : System Numbering
11-12 : Service Code Setup (for Service Access)
Aspire Software Manual Programming ◆ 823
11-12 : Service Code Setup (for Service Access)
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the Service Codes
which are used for service access. You can customize additional Service Codes in Programs 11-10,
11-11, and 11-13 through 11-16. The following chart shows:
● The number of each code (01-48)
● The function of the Service Code.
● What type of telephones can use the Service Code
● The code’s default entry. For example, dialing 805 (code 05) will cancel a previously set
Camp-On.
● Programs that may be affected with the changing the code.
If you change a Service Code, be sure to record your entry in the “New” column.
For “8xx” service codes used after dialing an extension (post-dialing), Program 11-16-09 (Single
Digit Voice Mail code) must be deleted or changed from the default entry of “8” for the service
codes to work.
Input Data
Level:
Aspire S Aspire M/L/XL
IN
• Available. • Available.
• Item 58 available. • Item 58 available with software 1.11+.
Item
No.
Item Terminals Default New
Related
Program
01 Call Forwarding / Do Not Disturb Override
Activating Call Forwarding/Do Not Disturb Override.
This code is only available if you disable the voice
mail Single Digit dialing code in Program 11-16-09.
KTS, SLT 807 11-16-09
02 Conference KTS, SLT #1
03 Override (Off-Hook Signaling) KTS, SLT 809
04 Set Camp-On KTS, SLT 850
05 Cancel Camp-On KTS, SLT 870
06 Switching of Voice Call and Signal Call
Used to toggle an ICM call between Handsfree
Answerback and Forced Intercom Ringing for outgo-
ing Intercom calls.
KTS, SLT 812
07 Step Call KTS, SLT 808
08 Barge-In KTS, SLT 810
09 Change to STG All Ring KTS, SLT No Setting 16-02
10 Common/Extension Abbreviated Dialing KTS, SLT #2