Filter
Top Products
Analog Communications Interface (ACI)
92 ◆ Features Aspire Software Manual
➻ 14-09-01 : ACI Conversation Recording Destination for Trunks - ACI Recording
Destination Extension Number
Use this option to assign the ACI Call Recording destination on a per trunk basis. The destina-
tion can be an ACI port’s extension number (assigned in Program 11-06-01) or an ACI Depart-
ment Group pilot number (assigned in Program 11-08-01). If destinations are assigned in
Programs 14-09 and 15-12, the destination in Program 15-12 will be followed.
➻ 14-09-02 : ACI Conversation Recording Destination for Trunks - ACI Automatic
Recording for Incoming Call
Determine whether a trunk should be automatically recorded when an incoming call is
received (0=off, 1=on).
➻ 14-09-04 : ACI Conversation Recording Destination for Trunks - ACI Automatic
Recording for Outgoing Call
Determine whether a trunk should be automatically recorded when an outgoing call is
initiated (0=off, 1=on).
➻ 15-07-01 : Programmable Function Keys
If required, program an ACI Conversation Record Key (code 69 + 0). This key allows an
extension user to press the key to manually record a call to the ACI.
➻ 15-12-01 : Conversation Recording Destination for Extensions - ACI Recording
Destination Extension Number
Use this option to assign the ACI Call Recording destination on a per extension basis. The
destination can be an ACI port’s extension number (assigned in Program 11-06) or an ACI
Department Group pilot number (assigned in Program 11-08). If destinations are assigned in
Programs 14-09 and 15-12, the destination in Program 15-12 will be followed.
➻ 15-12-02 : Conversation Recording Destination for Extensions - ACI Automatic
Recording for Incoming Call
Determine whether an extension should be automatically recorded when an incoming call is
received (0=off, 1=on).
➻ 15-12-04 : Conversation Recording Destination for Extensions - ACI Automatic
Recording for Outgoing Call
Determine whether an extension should be automatically recorded when an outgoing call is
received (0=off, 1=on).
➻ 31-05-01 : Universal Night Answer
For trunks which ring an external ringer connected to a 2PGDAD module, set the trunks to
ring “1”. When programming, the zones on the PGDAD adapter are numbers 1-8. The
NTCPU’s zone is number 9.
➻ 33-01-01 : ACI Port Type Setup
Set each ACI software port for input (1) or input/output (2). Use input ports for Music on Hold
sources. Use output ports for External Paging/ringer control.
Aspire S: ACI Ports1-8
Aspire: ACI Ports 1-96
➻ 33-02-01 : ACI Department Calling Group
Assign ACI software ports to ACI Department Groups. This lets ACI callers connect to ACI
software ports by dialing the group’s pilot number (set in Program 11-08).
Aspire S: ACI Ports 1-8, ACI Groups 1-4
Aspire: ACI Ports 1-96, ACI Groups 1-16