Filter
Top Products
Charts and Illustrations
Aspire Software Manual Features ◆ 31
Networking Code: *06 + network (01-
50)
Operation: Press key
Accessing a networked trunk None -
Night Service Code: 09 + mode (0, 1-4
or 1-8)
Operation: Press key
Activating the Day/Night
Mode
On red when
activated
818 +
+ 0
Off Hook Signaling Code: 33
Operation: Call ext. and
receive busy + Press key
Signaling a busy extension None 7
Paging, External Code: 19 + zone (1-8)
Operation: Press Key
Making an external zone page On red when
activated
803 + zone
Code: 20
Operation: Press key
Making an external All Call
page
On red when
activated
803 + 0
Paging, Internal Code: 21 + zone
(1-8, 1-9 or 01-64)
Operation: Press key
Broadcasting to an Internal
Paging Zone
On red when
activated
801 + zone
Code: 2
Operation: Press key
Broadcasting to all Internal
Paging zones
On red when
activated
801 + 0 or 00
Park Code: *04 + orbit (1-9 or
01-64)
Operation: Place or
answer call + Press key
Placing a call into or
retrieving a call from a Park
Orbit
Fast flash when orbit
is busy (green at
originator, red at
others)
#6 (Park)
*6 (pickup)
Repeat Redial Code: 29
Operation: Place call and
press key
Activating Repeat Redial
while on a call
Fast Flash while
system waits to
redial
-
Reverse Voice Over Code: 47 + dest. ext.
Operation: Press and
hold key
Initiating Reverse Voice Over Full BLF red -
Room Monitor Code:
39
Operation: Press key at
destination & source + ext
Activating Room Monitor Dest. Fast Flash red,
Source Hold Flash
red
-
Save Number Dialed Code: 30
Operation:
Save: Place call + Press
key
Redial: Line or CALL +
Press key
Saving, redialing or checking
a saved number
None -
Secretary Call
(Buzzer)
Code: 41 + sec. ext
Operation: Press key
Calling your secretary (using
the buzzer)
On red at source
Fast Flash red at
destination
-
Table 5: Function Key Codes by Features
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter the
code (e.g., 48 for Voice Over).
For this feature... Use this key... When your are... Key Lamp Status
Also See
Srvc Code