Filter
Top Products
Direct Inward Dialing (DID)
286 ◆ Features Aspire Software Manual
➻ 22-12-01 : DID Intercept Ring Group
For each DID Translation Table, program the DID Intercept destination. The destination can
be a Ring Group, In-Skin/External Voice Mail, or Centralized Voice Mail. This program is
used when there is no destination programmed in Program 22-11-05. It is unrelated to Pro-
gram 22-11-06 and 22-11-07.
➪ Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➪ Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➻ 22-13-01 : DID Trunk Group to Translation Table Assignment
Assign the DID trunk groups to translation tables. If all the DID trunks use the same type of
DID service, you may have only one DID trunk group and one DID Translation Table (with
many entries).
➪ Aspire S Trunk Groups: 1-8
➪ Aspire Trunk Groups: 1-100
➻ 22-17-01 : DID Conversion Table Area Setup for Time Pattern Mode
This program is used to define the times and DID Conversion Table (Program 22-11) for each
DID time pattern (1-8) when using the Call by Time Schedule feature. Start from 00:00 and be
sure to set up the input so the last entry of the time pattern is set to end at 00:00 (Entries: Start
Time = 0000 - 2359, End Time = 0000 - 2359, DID Conversation Table Number: 0 - 2000).
➻ 25-01-01 : VRS/DISA Line Basic Data Setup - VRS/DISA Dial-In Mode
Determine whether the system should use option 0 (Extension number/Service code specify)
or option 1 (Use dial conversion table) for calls.
➻ 25-01-03 : VRS/DISA Line Basic Data Setup - VRS/DISA Transfer Alarm
Determine whether the system should use option 0 (Normal) or option 1 (Alarm) for calls.
➻ 25-02-01 : VRS/DISA VRS Message
For each trunk port and each night mode, select the message source (0=No Message, 1=VRS,
2=ACI, 3=SLT), assign the VRS message number to be used as the Automated Attendant
Message for each trunk which is assigned as a VRS/DISA (With VRS=01-48 [VRS message
number], With ACI=1-4 or 01-16 [ACI group number], With SLT=1-8 or 01-64 [Department
Group number]).
➪ Aspire S: Trunk Ports 1-8, Night Service Time Mode 1-4
➪ Aspire: Trunk Ports 001-200, Night Service Time Mode 1-8
➻ 25-03-01 : VRS/DISA Transfer Ring Group With Incorrect Dialing
For each trunk port, set what happens to a call when the DISA or Automated Attendant caller
dials incorrectly or waits too long to dial. The call can either disconnect (0) or Transfer to an
alternate destination (a ring group, In-Skin/External, Centralized). When setting the DISA and
DID Operating Mode, you make an entry for each Night Service mode .
➪ Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➪ Aspire S: Trunk Ports 1-8, Night Service Time Mode 1-4
➪ Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➪ Aspire: Trunk Ports 001-200, Night Service Time Mode 1-8
➻ 25-04-01 : VRS/DISA Transfer Ring Group With No Answer/Busy
For each trunk port (001-200), set the operating mode of each DISA trunk. This sets what
happens to the call when the DISA or Automated Attendant caller calls a busy or unanswered
extension. The call can either disconnect (0) or Transfer to an alternate destination (a ring
group, In-Skin/External, Centralized). When setting the DISA and DID Operating Mode, you
make an entry for each Night Service mode.
➪ Aspire S Ring Groups: 1-8, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➪ Aspire S: Trunk Ports 1-8, Night Service Time Mode 1-4
➪ Aspire Ring Groups: 1-100, 102=In-Skin/External Voice Mail, 103=Centralized Voice Mail
➪ Aspire: Trunk Ports 001-200, Night Service Time Mode 1-8
➻ 25-05-01 : VRS/DISA Error Message Assignment
For each trunk that will be answered by the VRS, enter the VRS message (1-48) the outside
caller hears if they dial incorrectly after answer. If you enter 0, the call reroutes according to
Program 25-03 and Program 25-04. Make one entry for each Night Service mode.