NEC 5 Wok User Manual


  Open as PDF
of 1614
 
Last Number Redial
380 Features Aspire Software Manual
Last Number Redial
Description
Last Number Redial allows an extension user to quickly redial the last number dialed. For example,
a user may quickly recall a busy or unanswered number without manually dialing the digits.
Last Number Redial saves in system memory the last 24 digits a user dials. The number can be any
combination of digits 0-9, # and *. The system remembers the digits regardless of whether the call
was answered, unanswered or busy. The system normally uses the same trunk group as for the ini-
tial call. However, the extension user can preselect a specic trunk if desired.
Redial List
The system allows display telephones to have a Redial List. Up to 10 dialed numbers (both external
and internal destinations) are automatically stored in the Redial List. The user can display and
select one of the stored numbers and then redial it. If more than 10 destination numbers are dialed,
the oldest number is automatically erased to make room for the new number.
i-Series Phones Operation Different from Aspire Phones
When an i-Series telephone is connected to the Aspire system, the Last Number Redial operation is
slightly different.
When pressing the LND key, the display indicates "REDIAL [#] / ABB". The user can then press #
to redial the number displayed, or enter an Abbreviated Dialing bin number to be dialed. Pressing
the # key repeatedly will scroll through the last 10 numbers dialed.
Conditions
Redial List requires the use of a display telephone. Non-display and single line phones can not use
this feature.
Default Setting
Enabled.
Programming
11-12-12 : Service Code Setup (for Service Access) - Last Number Dial
Assign a service code (#5) to use Last Number Dial.
11-12-17 : Service Code Setup (for Service Access) - Clear Last Number Dialing Data
Assign a service code (876) to clear the Last Number Dial.
15-02-13 : Multi-Line Telephone Basic Data Setup - Redial List Mode
Select the type of numbers that will be stored in the Redial List - Internal and External num-
bers (0) or External only (1).
Aspire S Aspire M/L/XL
Available.
Number deletion operation enhanced with software
4.93+.
Available.
Number deletion operation enhanced with software
4.93+.