Filter
Top Products
Tandem Trunking (Unsupervised Conference)
550 ◆ Features Aspire Software Manual
➻ 24-04-01 : Automatic Trunk-to-Trunk Transfer Target Setup
Assign the Abbreviated Dialing number (0-1999) to be used as the destination for the trunk-
to-trunk transfer.
➪ Aspire S: Trunks 1-8
➪ Aspire: Trunks 1-200
➻ 25-07-07 : System Timers for VRS/DISA -DISA/Tandem Trunking Long Conversation
Warning Tone Time
Determine the length of time a DISA caller or any trunk-to-trunk (such as Tandem Trunking)
conversation can talk before the Long Conversation tone is heard (0-64800 seconds).
➻ 25-07-08 : System Timers for VRS/DISA - DISA/Tandem Trunking Long Conversation
Disconnect
This timer determines how long the system will wait before disconnecting a a DISA or any
trunk-to-trunk (such as Tandem Trunking) call after the Long Conversation tone is heard (0-
64800 seconds).
Trunk Disconnect Continue/Disconnect Codes (Requires software 4.0E+)
➻ 14-01-25 : Basic Trunk Data Setup - Continue/Disconnect Trunk-to-Trunk Conversation
When Program 24-02-10 is set to disconnect a trunk after the defined time, determine whether
or not a user should have the ability to use the continue/disconnect code (Entries: 0 = Dis-
abled, 1 = Enabled).
➻ 20-28-01 : System Option Setup - Conversation Continue Code
When Program 14-01-25 is enabled, determine the 1-digit code the user should dial (0 - 9, *,
#) to extend the conversation length for the time defined in 20-28-03. If the Continue and Dis-
connect codes are programmed the same (e.g., #), the system will follow the "Continue" oper-
ation. Using the Continue code before the warning tone is heard has no action.
➻ 20-28-02 : System Option Setup - Conversation Disconnect Code
When Program 14-01-25 is enabled, determine the 1-digit code the user should dial (0 - 9, *,
#) to immediately disconnect their call. Using the Disconnect code before the warning tone is
heard will disconnect the call.
➻ 20-28-03 : System Option Setup - Conversation Extend Time
When Program 14-01-25 is enabled, determine the length of time a call will be extended (0 -
64800 seconds) when the user dials the Continue code (defined in 20-28-01).
➻ 24-02-07 : System Options for Transfer - Forced Release for Trunk-to-Trunk Transfer
This timer will start when a trunk begins talking with another trunk (for example: trunk-to-
trunk transfer/Tandem Trunking). When this timer expires, a warning tone is heard. If Pro-
gram 24-02-10 is set, the conversation disconnects after that timer expires. This timer is set
again when the external digit timer expires. One of the trunks used must be an analog trunk
(or leased line). Entries: 0 - 64800 (seconds)
➻ 24-02-10 : System Options for Transfer - Trunk-to-Trunk Transfer Disconnect Timer
Determine how long a conversation will continue (0 - 64800 seconds) once the timer in Pro-
gram 24-02-07 expires. If this option is set to "0", the conversation will be disconnected
immediately. This program has no affect if Program 24-02-07 is set to "0". One of the trunks
used must be an analog trunk (or leased line).
➻ 25-07-07 : System Timers for VRS/DISA - DISA Long Conversation Warning Tone Time
Determine the length of time a DISA caller can talk before the Long Conversation tone is
heard (0-64800 seconds). If Program 25-07-08 is set to "0", the call is disconnected once the
timer expires. This timer is set again when the external digit timer expires.
Note: If this option is set to "0", the settings in Program 24-02-07 and 24-07-10 are followed -
not 25-07-07 and 25-07-08.