Filter
Top Products
Cordless II/Cordless Lite II Telephones
Aspire Software Manual Features ◆ 259
Changing Channels . . .
Change channels if you’re experiencing interference while on a call:
1. Press CHAN while on a call.
The TALK icon starts blinking and stops when the handset has completed the channel
change. Until this process is completed, no other functions are available.
The Cordless Lite II (P/N 780087) has 30 channels; the Cordless II (P/N 730088) has
10 channels.
ABBREVIATED DIALING
To dial your stored Abbreviated Dialing number:
1. Press TALK + #2 + Bin (for common).
OR
2. Press TALK + #4 + Bin (for group).
You may also have function keys for Abbreviated Dialing.
ANSWERING CALLS
Answering a call ringing your phone:
1. Listen for ringing and press TALK, any dial pad key, or press the flashing line key.
Press line or loop key if not connected to an outside call.
To mute a conversation, press the MUTE key. The TALK icon blinks. The caller cannot
hear you speak. Pressing the MUTE key again deactivates Mute.
While talking, if the handset cannot receive a signal from the base unit in approxi-
mately 35 seconds, it emits an error tone and goes to standby mode.
2. To disconnect, press TALK or place the handset back into the charging unit.
Picking up calls not ringing your phone . . .
If a call is ringing over the Page after hours:
1. Press TALK + #0.
When a call is ringing a co-worker’s phone:
1. Press TALK.
You can press a Group Call Pickup or Call Coverage function key instead of step 2.
2. ** + Co-worker’s extension.