Filter
Top Products
Program 20 : System Option Setup
20-02 : System Options for Multi-Line Telephones
Aspire Software Manual Programming ◆ 957
20-02 : System Options for Multi-Line Telephones
Description
Use Program 20-02 : System Options for Multi-Line Telephones to set various system options
for Multi-Line Telephones.
Input Data
Level:
Aspire S Aspire M/L/XL
IN
• Available. • Available.
• Item 15 not available. • Item 15 requires software 4.0E+.
Item
No.
Item Input Data Default
01 Trunk Loop Key Operation Mode 0 = Indicate Using Loop Trunk
1 = Not indicated
0
Mode 0 = Keep
Lamp
1 = Extinction
Incoming: 300 IPM Red blink
Talking: Green Light-
ing (on Talk-
ing TEL)
Extinction
(LED off)
Holding: 60 IPM
Green blink
(on holding
TEL)
Extinction
(LED off)
02 Trunk Loop Access Key Operating
Mode
Use this option to set the operating mode
of the extension’s trunk group keys. The
keys can be for incoming access, outgo-
ing access or both.
0 = Outgoing / Incoming
1 = Outgoing
2 = Incoming
0
03 BLF Control
Set the conditions under which a Hot-
line, Reverse Voice Over or DSS Con-
sole key indicates that an extension is
busy. Refer to the Reverse Voice Over
feature for more information.
0 = Idle / Busy (ON/OFF)
1 = Busy / Idle (ON/OFF)
1
04 Retrieve the Line After Transfer
Enable (1) or disable (0) an extension’s
ability to answer a call after it’s been
transferred, but before it’s answered.
0 = Not Holding
1 = Holding
1
05 Headset Busy Mode
Set the conditions under which a headset
extension is busy to incoming callers.
0=Headset busy with one CALL key busy
1=Headset busy with both CALL keys busy
0