Filter
Top Products
Charts and Illustrations
28 ◆ Features Aspire Software Manual
Call Forwarding,
External by Door
Box
Code: 54
Operation: Press key +
Dest. Number
Externally Call Forwarding
Door Box calls
Slowly flashes red *4
Call Forwarding,
Follow Me
Code: 15
Operation: Press key +
Dest. Extension
Call Forwarding Follow Me
to extension or Voice Mail
Slowly flashes red *2 + 3
Call Forwarding,
Immediate
Code: 10
Operation: Press key +
Dest. Extension
Call Forwarding Immediate
to extension or Voice Mail
Slowly flashes red *2 + 4
Call Forwarding, No
Answer
Code: 12
Operation: Press key +
Dest. Extension
Call Forwarding No Answer
to extension or Voice Mail
Slowly flashes red *2 + 6
Call Forwarding,
Off-Premise
Code: 17
Operation: Press key +
device type code +
requested data (depends
on device selected).
Setting up Call Forwarding
Off-Premise, Selectable
Display Messaging, VRS
Park and Page and VRS
Personal Greeting
Slowly flashes red *4
Call Forwarding,
Station
Code: 16
Operation: Press key +
Dest. Extension
Call Forwarding Station to
extension or Voice Mail
Slowly flashes red *2
Call Forwarding /
Do Not Disturb
Override
Code: 37
Operation: Call
extension + Press key
Overriding an extension’s
Call Forwarding or Do Not
Disturb
None -
Callback / Camp
On/ Trunk Queuing
Code: 35
Operation: Call busy
extension or access busy
trunk + Press key
Leaving a Call back request
at a busy extension, Camping
On to a busy extension, or
Queuing for a busy trunk
On red when
activated
2
Call Redirect Code
: 49 + extension or
voice mail
Operation: Press key
Redirect a ringing call to the
predefined destination
On red when acti-
vated
-
Central Office Calls Code: *01 + Trunk num-
ber (001-200)
Operation: Press key
Pressing a line key to place or
answer a trunk call (where
trunks are 001-200)
On green when
seized, on red when
in use (by other
party), Slow Flash
green when ringing,
Hold flash when on
Hold
#9
Conference Code: 07
Operation: Set up call +
Press key + set up call to
add + Press key twice
Setting up a Conference or a
Meet Me Conference
On red during setup #1
Table 5: Function Key Codes by Features
To program a key, press CALL, dial 851 (for 2-digit codes) or 852 (for 3-digit codes), press the key and enter the
code (e.g., 48 for Voice Over).
For this feature... Use this key... When your are... Key Lamp Status
Also See
Srvc Code