Filter
Top Products
Aspire Wireless
Aspire Software Manual Features ◆ 103
Camp On / Callback
If you heard a busy signal when calling a co-worker, use Camp On or Callback:
1. Dial 2 to Camp On (wait without hanging up).
(Intercom calls) If you hear two beeps, you can speak. If you hear busy/ring, dial 6 to
send a Voice Over.
(Outside calls) When you hear new dial tone, place your call again.
OR
Dial 2 and hang up to leave a Callback for a free line or extension.
Wait for the system to call you back.
2. Press the ON-HOOK/OFF-HOOK key when the system rings you back.
(Outside calls) Place your call again.
(Intercom calls) Speak to co-worker.
To cancel your Callback:
1. Press the ON-HOOK/OFF-HOOK key.
2. Dial 870 + Hang up.
Conference
Establishing a Conference Call:
1. Place or answer call + the R (HOLD/RECALL) key + #1.
2. Place/answer next call + the R (HOLD/RECALL) key + #1.
You may have up to 32 callers. Your software determines if there is any restriction on
the number of outside parties. Repeat this step to add more parties.
3. After adding all parties, press the R (HOLD/RECALL) key twice to set up the Conference.
Do Not Disturb
Using Do Not Disturb:
1. Press the ON-HOOK/OFF-HOOK key.
2. Dial 847.
3. Dial the DND option code (0-4).
1 = Blocks outside calls
2 = Blocks Paging, Intercom calls, Call Forwards and Transferred outside calls.
3 = Blocks all calls
4 = Blocks Call Forwards
0 = Cancels DND
Turning off your handset:
1. Press the OK key for 3 seconds.
The phone will beep and the display will go blank when the phone is off.