Filter
Top Products
Volume Controls
700 ◆ Features Aspire Software Manual
Volume Controls
Description
Each keyset user can control the volume of incoming ringing, splash tone, Paging, Background
Music, Handsfree and your handset. Keysets consolidate all adjustments into the volume buttons.
Pressing the VOLUME ▲ or VOLUME ▼ will adjust the volume level for whichever feature is
active (outside call, ICM, ICM ringing, paging, etc.). Pressing these keys when the phone is idle
will adjust the contrast level of the telephone’s display. The users should set the volumes for their
most comfortable levels.
Handset Volume Reset Option Available
Depending on your software, an option is available which allows the system to either reset the
handset volume back to the default setting after hanging up the handset or it can retain the user’s
setting.
Conditions
The contrast is not adjustable when the
phone has background music enabled or
if it is a super display telephone.
Default Setting
Enabled.
Programming
➻
11-11-37 : Service Code Setup (for Setup/Entry Operation) - Adjusting Ring Volume
If required, change the service code used to adjust a keyset’s ring volume (829).
➻ 15-02-27 : Multi-Line Telephone Basic Data Setup, Retain Handset Volume
This option determines whether a keyset’s handset volume will change back to the system
default (0) or whether it will be retained at the user’s setting (1) after hanging up the handset.
Related Features
None
Aspire S Aspire M/L/XL
• Available.
• Handset volume reset option requires software 2.63+.
• Available.
• Handset volume reset option requires software 2.63+.
FLASH
VOL
CONF
MSG
Volume Down
Handsfree, Handset, Page and BGM Volume
Volume Up
N2IP-8