Filter
Top Products
Abbreviated Dialing
Aspire Software Manual Features ◆ 77
To dial a Common Abbreviated Dialing number:
Four-digit bin numbers must be dialed using the keyset’s Soft Keys.
3-Digit Bin Number
s Only
1. At keyset, press idle CALL key.
OR
At single line set, lift handset.
2. Dial #2 (000-999).
OR
Press DIAL key.
OR
Press Common Abbreviated Dialing key (PGM 15-07 or SC 851: 27).
To preselect, press a line key in step 1 (instead of CALL) before pressing the DIAL or
Abbreviated Dialing key).
3. Dial Common Abbreviated Dialing storage code (000-999).
The stored number dials out.
Unless you preselect, Trunk Group Routing selects the trunk for the call. The system
may optionally select a specific Trunk Group for the call.
If you have a DSS Console, you may be able to press a DSS Console key to chain to a
stored number.
4-Digit Bin Number
s
1. At keyset, press the DIR Soft Key.
2. Press the ABBc Soft Key.
3. Use the
↑↑
↑↑
or ↓↓
↓↓
to locate the number you wish to call.
4. Press the DIAL Soft Key.
The stored number dials out.
To store a Common Abbreviated Dialing number under a Programmable Function
Key:
1. At keyset, press idle CALL key.
2. Dial 851.
3. Press the key which is to store the number.
4. Dial 01.
5. Dial #2 + the 3-digit bin number (000-999) to be stored.
Four-digit bin numbers can not be stored with this function.
6. Press HOLD.
7. Press SPK to hang up.
To dial a Common Abbreviated Dialing number under a Programmable Function
Key:
1. At keyset, press idle CALL key.
2. Press the key which has the stored number to be dialed.
The number seizes an outside line and dials out.