Filter
Top Products
Call Forwarding
Aspire Software Manual Features ◆ 157
2. Dial 1 plus extension to enable; dial 0 to disable.
Once you activate Call Forwarding, only your Call Forwarding destination can place
an Intercom call to you.
3. Dial destination extension, Voice Mail master number or press Voice Mail key.
You’ll hear stutter dial tone when placing a new call.
Your Call Forwarding Programmable Function Key flashes when Call Forwarding is
activated.
OR
1. For Selectable Display Messaging, press Call Forwarding to Device key (PGM 15-07 or SC
851: code 17 for Forward to Device).
2. Dial 3 + Message number (01-20).
Use VOL
▲ or VOL ▼ to scroll through the messages.
3. (Optional for messages 1-8 and 10)
Dial the digits you want to append to the message.
You can append messages 1-8 and 10 with digits (e.g., the time when you will be back).
You enter the time in 24-hour format, but it displays in 12-hour format.
4. Press SPK to hang up.
Intercom calls to extensions with Selectable Display Messaging set will receive a DND
signal and receive the display message on their telephone’s display instead of ringing the
extension based on the setting in Program 20-01-02.
To allow calls to ring through and have the message displayed on the calling exten-
sion’s display, cancel DND by pressing DND + 0.
To Activate/Cancel Call Forwarding While on a Call:
Prior to being on an active call:
1. Set Call Forwarding using the Call Forwarding key (PGM 15-07 or SC 851: code 16).
Call Forwarding key + Call Forward condition (1-0) + extension number + Call For-
warding type (2-4).
2. Cancel Call Forwarding using the Call Forwarding key.
Call Forwarding key + 0.
1. While on the call, press the Call Forwarding key.
Pressing the key will reactivate the Call Forwarding programming used in Step 1 above.
To Forward No Answer Calls:
1. While idle, press the Call Forward No Answer key (PGM 15-07 or SC 851: 12).
2. Press “1” to set forwarding or “0” to cancel if previously programmed.
3. Dial the extension number to which the unanswered calls should be transferred.