Filter
Top Products
Music on Hold
428 ◆ Features Aspire Software Manual
Programming
Note: Other ACI programming may be
necessary. Refer to the Analog
Communications Interface feature for more.
Start
Should a trunk use
the NTCPU, or the
external source
connected to the BGM
or ACI port for MOH?
In 14-08-01,
enter 0.
In 14-08-01,
enter 2.
ACI Port
NTCPU
In 14-08-01,
enter 1.
BGM Port
In 10-04-01,
enter 1.
Should the NTCPU use
the internal or external
music source or should it
provide an internal
service tone?
In 10-04-01,
enter 0.
In 10-03-01, confirm the
PGDAD module to be
used for external music
source is recognized and
has type "9" assigned.
In 11-06-01, assign
an extension number
to the ACI port.
Select a number
outside the normal
extension number
range (ex: 750).
Default Extension
Number Range:
301-499, 5000-5312
Is the system being
programmed an
Aspire or Aspire S?
In 10-21-01, set the external
relay to one of the following:
0=CPU MOH, 1=BGM,
2=CPU External Page,
3=General Purpose Relay
Aspire
Is the system
being
programmed
an Aspire or
Aspire S?
In 10-21-01, set the
external relay to one
of the following:
0=CPU MOH,
1=BGM, 2=CPU
External Page,
3=General Purpose
Relay
Aspire
On the 2PGDAD
module, should
circuit 1 or 2 be used
for external MOH?
Circuit 1
In 10-03-06,
confirm the
PGDAD module
to be used for
external music
source is
recognized and
has type "9"
assigned.
Circuit 2
In 10-03-07, note the
logical ACI port
number.
In 10-03-02, note the
logical ACI port
number.
Go to "A"
on the next
page.
In 10-04-02,
enter 0 for
silence or 1 or 2
for synthesized
music selections.
Stop
Go to "B"
on the next
page.
Aspire S
Internal External
In 10-04-01,
enter 2.
Internal Service
Tone
In 80-01-01,
adjust the tone
heard by the
user if required.
Aspire S