Filter
Top Products
Program 15 : Extension, Basic Setup
15-07 : Programmable Function Keys
Aspire Software Manual Programming ◆ 921
66 CTI Red On: CTI active
67 Mail Box Extension Number or Depart-
ment Group Number
Rapid Blink (Green): New message
received
Red On: Listening to messages.
68 Voice Mail Service 0 = Skip
1 = Back Skip
2 = Monitor
2-In case of monitor mode
Slow Blink (Red): Monitor setting -
Automatic
Red On: Monitor setting - Manual
69 Conversation Record - ACI 0 = ACI as Record Destination
1 = Not Used in U.S.
2 = Not Used in U.S.
3 = Not Used in U.S.
Red On: Recording call.
70 Automated Attendant for
Extension
Extension Number or
Department Group Number
None
71 Message Change for Voice
Attendant
Extension Number or
Department Group Number
None
72 - Not Used -
73 - Not Used -
74 - Not Used -
75 - Not Used -
76 - Not Used -
77 Voice Mail (In-Skin) Extension Number or Pilot
Number
Red On: Access to Voice Mail
Rapid Blink (Green): New Message
78 Conversation Recording - Voice
Mail
Rapid Blink (Red): Recording
79 Automated Attendant (In-Skin) Extension Number or Pilot
Number
Red On: Set Up for All Calls
Fast Blink (Red): Set Up for No
Answer Calls
Stutter Blink (Red): Set Up for
Busy Calls
Slow Blink (Red): Set Up for Busy/No
Answer Calls
80 Tandem Ringing 1=Set or 0=Cancel
Extension Number to Tandem
Ring
Red On: Active
86 Set Private Call Refuse
This key enables/disables the
“Private” call refusal for the
trunks set to "1" in Program
14-01-27.
Slow Blink (Red): Active
Function
Number
Function Additional Data LED Indication