Filter
Top Products
Long Conversation Cutoff
386 ◆ Features Aspire Software Manual
Long Conversation Cutoff
Description
For incoming and outgoing central office calls, each trunk can be programmed to disconnect after a
defined length of time. The timer begins when the trunk is seized and disconnects the call after the
timer expires.
When used with the Warning Tone for Long Conversation feature, the system can provide a warn-
ing tone on outgoing trunks calls before the call is disconnected. This tone is not available to analog
single line telephone users nor is it available for incoming calls.
Conditions
None
Default Setting
Disabled.
Programming
➻
14-01-14 : Basic Trunk Data Setup - Long Conversation Cutoff
Enable (1) or disable (0) a trunk’s ability to disconnect incoming and outgoing central office
calls automatically.
➻ 14-01-15 : Basic Trunk Data Setup - Long Conversation Alarm Before Cut Off
Enable (1) or disable (0) the Long Conversation Alarm for each trunk.
➻ 20-06-01 : Class of Service for Extensions
Assign a Class of Service (1-15) to extensions.
➻ 20-13-02 : Class of Service Options (Supplementary Service) - Long Conversation Cutoff
(Incoming)
Enable (1) or disable (0) an extension’s class of service from using Long Conversation Cutoff
for incoming calls.
➻ 20-13-03 : Class of Service Options (Supplementary Service) - Long Conversation Cutoff
(Outgoing)
Enable (1) or disable (0) an extension’s class of service from using Long Conversation Cutoff
for outgoing calls.
➻ 20-21-03 : System Options for Long Conversation - Long Conversation Cutoff for
Incoming Calls
Enter the time the system will wait before disconnecting incoming trunks (0-64800 seconds).
➻ 20-21-04 : System Options for Long Conversation - Long Conversation Cutoff for
Outgoing Calls
Enter the time the system will wait before disconnecting outgoing trunks (0-64800 seconds).
Aspire S Aspire M/L/XL
• Available. • Available.