Filter
Top Products
Program 15 : Extension, Basic Setup
15-15 :Aspire Wireless Terminal Basic Data Setup
940 ◆ Programming Aspire Software Manual
03 DECT Terminal Basic Data Setup - Terminal Capability
This program displays the capability of the Aspire Wireless
(DECT) phone displaying the options below. This program
is read only.
• Display Capabilities
• ISDN Support
• Tone Capabilities
• Data Services Profile E Class 2
• Echo Parameters
• Data Services Profile A/B Class 2
• Portable Part Ambient Noise Rejection (N-REJ)
• Multi-Bearers Support for Data Services Profile
• Adaptive Volume Control Provision (A-Vol)
• Data Services Profile C Class 2
• Slot Type Capability
• Data Services Profile D Class 2
• Number of Stored Display Characters
• Data Services Profile F Class 2
• Number of Lines in Display
• DECT/GSM Interworking - GSM Bearer Service
• Number of Characters Per Line
• DECT/GSM Interworking - GSM SMS Service
• Scrolling Behavior Field
• DECT/GSM Interworking - GSM Facsimile Service
• GAP/PAP Support
• Control Codes
• DECT/GSM Interworking Profile Supported
• ISO8859-1 Support
This program is
read only.
-
04 DECT Terminal Basic Data Setup - Model Identifier
This program shows the model identifier that the Aspire Wire-
less (DECT) terminal uses. The model identifier contains the
following items: Manufacturer Identification Code (MANIC)
and Model Identification Code (MODIC). This program is read
only.
This program is
read only.
-
05 DECT Terminal Basic Data Setup - Voice Mail Answering
When Out of Range
This program enables (1) or disables (0) the ability for calls to
be transferred to voice mail if the Aspire Wireless (DECT)
phone is out of range. If Program 15-15-05 and 15-15-06 are
both enabled, Program 15-15-05 takes priority. If both pro-
grams are disabled, the caller hears a lock-out tone and they
may see “Out of Range” on their display.
0 = Disabled
1 = Enabled
0 15-15-05
15-15-06
06 DECT Terminal Basic Data Setup - Call Transferring
When Out of Range
This program enables (1) or disables (0) the ability for calls to
be transferred to another extension if the Aspire Wireless
(DECT) phone is out of range. If Program 15-15-05 and
15-15-06 are both enabled, Program 15-15-05 takes priority. If
both programs are disabled, the caller hears a lock-out tone and
the may see “Out of Range” on their display.
0 = Disabled
1 = Enabled
0 15-15-05
15-15-06
Item
No.
Item Input Data Default
Related
Program