Filter
Top Products
Program 92 : Copy Program
92-05 : Data Swap Password
1562 ◆ Programming Aspire Software Manual
Conditions
(A.) Any user-defined programming stored in the SRAM will not be swapped (for example, Call
Forward set up, Selectable Display Messaging, etc.).
(B.) The extensions to be swapped must be idle while the swap is performed, or an "Invalid" error
message will be received.
(C.) Data for virtual extension's cannot be swapped.
(D.) When a swap is performed, the following actions are executed for the swapped extensions.
- Camp On Clear (Program 11-12-05)
- Common Cancel (Program 11-12-37)
- Last Number Redial Clear (Program 11-12-17)
- Saved Number Clear (Program 11-12-18)
- Incoming History data is deleted.
(E.) Using this option will also swap the order in which these extensions are displayed in all exten-
sion-related programs . This means that the system will no longer display all the extension
numbers from low to high. For example, if port 2 and 6 were swapped, when viewing the
extensions in 15-02-01, the extensions will display in the following order: 301, 306, 303, 304,
305, 302.
21-11 Hotline Assignment
21-13 ISDN Calling Party Number Setup for Extensions
21-15 Individual Trunk Group Routing for Extensions
21-18 IP Trunk Calling Party Number Setup for Extensions
21-19 IP Trunk (SIP) Calling Party Number Setup for Extensions
21-20 SIP Trunk Call Discernment Setup for Extensions
22-04 Incoming Extension Ring Group Assignment
22-06 Normal Incoming Ring Mode
23-02 Call Pickup Group
23-03 Ringing Line Preference
23-04 Ringing Line Preference for Virtual Extensions
24-03 Park Group Assignment
24-06 Fixed Call Forwarding
24-07 Fixed Call Forwarding Off-Premise
26-04 ARS Class of Service
26-07 Not used in U.S.
31-02 Internal Paging Group Assignment
41-02 ACD Group and Agent Assignments
41-17 ACD Login Mode Setup
42-02 Hotel/Motel Telephone Setup
92-05 Password for Extension Data Swap
Program
No.
Program Name