Filter
Top Products
Cordless II/Cordless Lite II Telephones
Aspire Software Manual Features ◆ 263
PLACING AN OUTSIDE CALL
Press a line key for quick access:
1. Press TALK.
OR
1. Press a programmed line key.
“AQUIRING LINK” blinks in the display while trying to connect to the base unit. The
TALK icon appears and the line key lights when connected.
If there is no connection to the base unit, an error tone is heard and “NO SERVICE” is
temporarily displayed on the LCD.
2. Listen for dial tone + Outside number.
You can have function keys for lines or line groups.
If your system is behind a PBX, you may have to dial 9 before your number.
To mute a conversation, press the MUTE key. The TALK icon blinks. The caller cannot
hear you speak. Pressing the MUTE key again deactivates Mute.
While talking if the handset cannot receive a signal from the base unit in approxi-
mately 35 seconds, it emits an error tone and goes to standby mode.
3. To disconnect, press TALK or place the handset back into the charger.
Dial codes for outside lines:
1. Press TALK + 9 + Outside number.
OR
1. Press TALK + 804 + Line group (Aspire S: 1-8, Aspire: 1-9 or 001-100) + Outside number.
OR
1. Press TALK + #9 + Line number (e.g., 005 for line 5) + Outside number.
SAVE
Save your call for quick dialing later on:
1. Press the SAVE programmable function key.
Then redial your saved number:
1. Press TALK + SAVE programmable function key.
The system selects an outside line.
OR
2. Press TALK + a line key + SAVE programmable function key.
The call uses the line you select.